Part Location Diagram of WB13T10065 GE ELECTRODE TOP
See part 450 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

ELECTRODE TOP WB13T10065

 Fits your CGS980SEM1SS!

Rated by 3 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 35.17
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your CGS980SEM1SS!
PartSelect Number PS1022004
Manufacturer Part Number WB13T10065
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric.
Part# WB13T10065 replaces these:
AP3842287, 1166725
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Failed ignighter
Repair is easy. The keeper ring installation while holding the spring down was tricky. An extra set of hands is helpful in holding and replacing the keeper ring.
  • Connie from WESTFIELD, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The electrode had broke
I unscrewed the base where the electrode was attached to detached the electrode detached the wire to the electrode inserted new electrode with holding spring and clamp attached wire to electrode.
I then put the base back on top and screwed in the two screws assembled the remaining parts and turned on the stove unit and it worked I am very happy.
  • O.Robert from Montrose, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ignitor wouldn't spark
Compressing the spring to apply the retainer clip was some what of a challange. But, everything went fine. Mission accomplished.
Other Parts Used:
SPRING IGNITER WASHER IGNITER ELECTRODE TOP Burner Cap - Black - Medium - 9500 BTU
  • David from Cherryvale, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
11 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

10 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sam
July 22, 2019
One of the igniters stays clicking when using that burner. Not sure if i should replace the top electrode, or the spark switch assembly.
For model number JGB605DET3BB
PartSelect logo
Hello Sam, thank you for your question. The issue would most likely be either the spark switch assembly or the spark electrode. Because the burner is making the clicking sound when its not in use, that is a good indicator that the spark switch assembly is bad. We would recommend replacing that first. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lisa
October 17, 2022
Is this the part for the right front burner? Also what is the best way to remove the old one? I have tried to pry it out using a small flat screwdriver, but it will not come out.
For model number c2s980sem1ss
PartSelect logo
Hello Lisa, thank you for your question. We have a video for a similar model that should be of some help for you. We hope this helps.

Was this helpful?
Thank you for voting!
Joanne
August 5, 2023
Hi, Sorry see above model number. Wondering if it’s compatible ?
For model number GE PCG8911SEJ1SS
PartSelect logo
Hello Joanne, thank you for your question! This part is not compatible with your model. Your model does not have an electrode for the cooktop. It has a harness switch, part number PS12307360, that produces the spark needed to light the surface burner elements. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Frank
September 15, 2017
Electro spark igniter will not stop sparking. Usually if it gets if it gets wet it will spark for a day even when i dry it off but this time. But this time it will not stop. I have tried cleaning it off with acetone drying it but it still sparks. How can i fix this problem?
For model number JGP945BEKBB
PartSelect logo
Hi Frank, Thank you for your question. In cases like this it is best to check your electrode itself, the igniter switch, and the spark module. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Sonya
March 25, 2018
My front left burner would not light. I could hear a clicking and see a spark but it would not light. So I exchanged my back electrode top, which worked and placed it on the front burner, but my burner still did not work. What do you think is the problem? I checked the metal burner cover to make sure there weren't any clogs keeping the gas from meeting with the spark and I did not notice any.
PartSelect logo
Hello Sonya, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Steve
April 12, 2018
How do you change electrodes on this cooktop do you have a video
For model number jgp945 wek 1ww
PartSelect logo
Hi Steve, Thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. First, remove all the burner grates and caps from the cooktop. Then remove the mounting screws securing all of the burner bases. Then insert a putty knife under the sides of the main top to release the spring clips. Lift the cooktop up and support it with a sturdy object. Use a 16mm open ended wrench to remove the orifice holder you wish to replace. Remove the mounting screw to release the old electrode and disconnect the wire. Attach the new electrode to the wire and secure it with the screw. Follow the steps in reverse to finish. Restore power to the stove and everything should now work for you. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Andrew
October 22, 2019
Is this part the replacement for the front right electrode? Mine broke when the 20,000 btu burner "legs" warped inwards (due to heat, i'm assuming) and making it very difficult to lift of the stove top. I had to pry it out and as a result snapped the electrode. It still receives a spark when "pushed down", but then you either get burned or shocked! ;-)
For model number ccgs985set3ss
PartSelect logo
Hello Andrew, thank you for your question. This Top Electrode is not shown as compatible to your model range. For your range you will need the Top Burner Electrode part number PS231266. Good luck with your repair!

Was this helpful?
Thank you for voting!
Shimon
December 3, 2019
I have a model GE cafe cgs980sem6ss and one of the burners intermittently fails to spark. Is it a problem with spark module (part 110) or just electrode (part 450 for all 4 burners?) or is it something else completely. Once turned on, the front right burner starts instantly and stably, but when it cools we get into same cycle again. Gas supply is fine (i can hear and smell it), cleaned all electrodes and burners. What about wires? If it's an issue with spark module, does it come with all wires ? Thank you.
For model number CGS980SEM6SS
PartSelect logo
Hi Shimon, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Norm
August 13, 2021
Our monogram cooktop griddle… First grill igniter would not shut off Now only glows when turned to Max and ignites burner for only a short time. Then both igniter and burner shut off
For model number Zgu364nd
PartSelect logo
Hello Norm, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: spark module, and igniter glowbar. Since there are different part numbers depending on the version of your model, we would need your full model number to provide additional repair information. The model number you provided should have a number from 1 to 8 followed by a SS. Hope this helps.

Was this helpful?
Thank you for voting!
John
June 3, 2022
Is this the right igniter for the stove top
For model number CGS980SEM2SS
PartSelect logo
Hello John, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1022004 for the 4 Side Burners and PartSelect Number PS952858 for the Center Burner. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1022004
Manufacturer Part Number: WB13T10065
Brand
Model Number
Description
General Electric
C2S980SEM1SS
Range - Dual Fuel
General Electric
C2S980SEM2SS
Range
General Electric
C2S980SEM3SS
Range
General Electric
C2S980SEM4SS
Range
General Electric
C2S980SEM5SS
Range
General Electric
C2S980SEM6SS
Range
General Electric
C2Y366P2M1S1
Range
General Electric
C2Y366P3M1D1
Range
General Electric
C2Y366P4M1W2
Range
General Electric
C2Y486P2M1S1
Range
General Electric
CGS980SEM1SS
Range - Gas
General Electric
CGS980SEM2SS
Range
General Electric
CGS980SEM3SS
Range
General Electric
CGS980SEM4SS
Range
General Electric
CGS980SEM5SS
Range
General Electric
CGS980SEM6SS
Range
General Electric
CGS980SEM7SS
Range
General Electric
CGU366P2M1S1
Cooktop
General Electric
CGU366SEH1SS
Cooktop - GAS COOKTOP
General Electric
CGU486P2M1S1
Cooktop
General Electric
CGY366P2M1S1
Range
General Electric
CGY366P3M1D1
Range
General Electric
CGY366P4M1W2
Range
General Electric
GUAP240EM2WW
Refrigerator - Refrigerator
General Electric
JGP333DET1BB
Cooktop
General Electric
JGP333DET1WW
Cooktop
General Electric
JGP333DET2BB
Cooktop - GAS COOKTOP
General Electric
JGP333DET2WW
Cooktop - GAS COOKTOP
General Electric
JGP333DET3BB
Cooktop - GAS COOKTOP
General Electric
JGP333DET3WW
Cooktop - GAS COOKTOP
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service