Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dennis C - March 10, 2019
Verified Purchase
Easy, quick repair of stove.
It took a lot longer to find out online what part I needed and how to replace it than it took to actually do the job. The part was exactly what I needed and the stove top safety feature works well again.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
March 9, 2018
The front right burner takes forever to heat utensils in all three burner usage. Also, the red indicator light in panel does not work. The burner hot red light stays on permanently. Do you know what the problem (s) are?
For model number JB968TKWW
Hello James, thank you for your question. If the top heating element is not heating up properly on any setting the issue is most likely the infinite switch that controls the burner. I would recommend replacing that part first! I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dennis
January 9, 2019
All but one of the lights on the hot cooktop indicator light function normally. Does the part have to be replaced, or can this one indicator light be fixed?
For model number CS908STISS
Hello Dennis, thank you for your question. The hot cooktop indicator lights that are under the cooktop glass at the front are part of one module assembly and would have to be replaced as a whole. The part number is WB25T10050. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
January 12, 2022
The red hot burner light stays on after the 6" burner has cooled down. The burner is even cold and the red light remains on. The power to the range has been turned off and then reset with not change. The burner works fine. Do you have a possible cause?
For model number P B910D P4BB
Hello Thomas, thank you for writing. Yes, the PartSelect Number PS1019157 you had chosen is a possible cause for this issue. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
Balraj
November 29, 2018
Would this infinite switch fit this model
For model number PB975S M2SS
Hello Balraj, thank you for your question. There are three infinite switches on the right, which are part number WB24T10119. The switch on the far left is WB24T10063 and the next one in from that is WB24T10028. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
