See part 24 in the diagram
( Grid squares measure 1x1 inch )
Electronic Control Board
$
447.74
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS10064575
Manufacturer Part Number W10757086
Manufactured by
Whirlpool
Product Description
Electronic Control Board Specifications
This board comes with the metallic shield.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Jenn-Air.
Part# W10757086 replaces these:
AP5956392, 12001691, 12001691R, 71002034, 71002594
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Keith
April 16, 2018
Hi, i am wondering if this electronic control board fits with my Jenn-Air downdraft dual fuel range model svd48600p? Partselect number ps10064575
Manufacturer part number w10757086
For model number SVD48600P
Hi Keith,
Thank you for your question. No, this is not the correct electronic control board for your downdraft. The part number listed under your model number for the electronic control board is PS2003254. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Don
September 7, 2017
Today the range started beeping and flashing an error message: F7 or fc. Pressing cancel stops it, but only for a few seconds. Any possibilities other than replacing the panel?
For model number sve476000
Hi Don,
Thank you for the question, F7 is a shorted key error. It can be caused by the keypad or the control board.
I would start by making sure the electrical ribbon going from the panel to the board is not damaged and plugged in all the way. Also use a Q-tip to clean the connectors. In most cases if this didn't fix the issue the panel will need to be replaced.
Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Ramona
November 14, 2017
How to take top off to get to control board
For model number Sve47600w
Hi Ramona, Thank you for the question. First remove the 4 Phillip head screws that hold the control panel trim to the bottom of the Control Panel With Touch Pad.Next removed the knobs.Removed the 4 Phillip head screws that are located behind the knobs.Removed the 4 hex head screws from the bottom of the Control Panel.Then remove the panel a few inches and remove the two cable connectors. Squeeze the two small tabs on the connector and carefully remove the ribbon cable.The Control Board has just two hex head screws holding it in place. Remove them and reverse steps to reassemble. Hope this helps!
Was this helpful?
Thank you for voting!
Dave
August 23, 2017
My oven broiler won't turn off - must unplug unit. When i plug unit back in, the broiler automatically turns on. So can't use unit. What part is defective? Thank you
For model number SVE47600B
Hi Dave,
Thank you for your inquiry. It sounds like either the long oven sensor or the electronic control board is causing the issue. I would check both with a multimeter to see which one is causing the issue. I hope this helps the repair. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Don
April 25, 2018
My Jenn-Air oven has very little heat when on the bake element was not hot i replaced it did not fix the problem the sensor checked good i'm not getting any codes show up could the electronic control board be bad or is there something else that could be bad thanks
For model number SVE47600B
Hi Don,
Thank you for your question. If the bake element and the sensor are checking out fine, then you will need to the check the wiring that is connected to the parts as well as the electronic control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Rick
April 23, 2019
Does the control panel fit my model? Your on-line site indicates it does fit the Jenn-Air svd48600pg
For model number SVD48600P
Hello Rick, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2078136. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Was this helpful?
Thank you for voting!
Don
June 11, 2019
My stove works fine except the oven fan blows constantly after it heats up. This never happened previously. It used to come on only when using the broiler. Is this a thermostat problem or a problem with the electronic control board? What part do i need?
For model number SVE47600B
Hello Don, thank you for inquiring. For this symptom you will want to consider either the Electronic Clock Control Board part PS11743858 or the High Limit Thermostat part PS11744498. We hope this helps.
Was this helpful?
Thank you for voting!
Deborah
February 28, 2020
The clock and oven temperature read-out can only be faintly read when there is absolutely no light in the room. Also, the fan does not work, unless it automatically goes on with a high baking temperature. What part(s) am I looking for?
For model number SVE47600B
Hello Deborah, Thank you for the question. This sounds like the Electronic Clock Control Board, PartSelect Number PS11743858 will need to be replaced. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 5 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Many misc. electrical issues
After removing the protective panel from the back, I used one of those screw holes to hold the new mother board right next to the existing one. I unplugged one connection & and plugged in to the new board. A couple of the wires didn't reach, but I committed those to memory. It looks a lot more intimadating than it is. It looks like a bunch of spaghetti, but its easier than it looks and it saved me at least $750
-
Edmund from Fords, NJ -
Difficulty Level:A Bit Difficult -
Total Repair Time:1- 2 hours -
Tools:Screw drivers -
Parts Used:W10757086
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My oven would either turn off or on by itself
I deduced that it had to be a major computer part and when I e-mail parts select, they concurred. I got the part and had my repair guys come install it. It did not work when he finished after three hours. after another mother board was sent a friend carefully installed it with me recording the lineup of the wires and calling them out to him. when he took the other board off he found a bad port, that did not fit well. it is now working beautifully and I got to bake all my cookies and bars for the holidays! Thank you Parts select for you help and your forum! couldn't have done it without you!
-
Elaine from Jacksonville, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver
-
Parts Used:W10757086
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat in any mode
Turn breaker off and start replaceing wires one at a time until you have the new part wired. Then secure new part and turn the breaker back on and it'll work. It's just that simple.
-
Arnold from Augusta, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
Parts Used:W10757086
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat
I cut off the electricity. Removed the back panel. Moved 1 wire at a time from old board to new board. Then removed the old board and replaced the new one. Reattached the back panel and turned on the electricity. I was happy when the oven began to heat.
-
Ila from Carthage, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
-
Parts Used:W10757086
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tomato Soup
There are days when the distraction levels are higher than others; lets say you leave tomato soup on High, it boils over and runs down the sides and back of your stove. When it makes contact with ANY electrical part it DOES short out, the electrical connection can actually catch on fire. To top it all off It becomes a thick paste that is only removed by scraping and scrubbing. Double check to make sure it is out of the electrical connection block before plugging the unit back in or it'll short out again, possibly starting yet another fire. This control board has one screw and a couple wires, remove the old toasted board, install the new one and pull and move one wire at a time from the old to the new board.
-
Joseph from Coopersburg, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:W10757086
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Richard S - February 13, 2019
JennAire Control Board Replacement
Lower element was not turning on. Replacement board fixed the problem. Easy installl.
Alicia F - September 11, 2018
Worked great
The replacement part worked like a charm.
Scottt T - May 14, 2018
Great item.
Easy install & fixed my problem.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10064575
Manufacturer Part Number: W10757086
Manufacturer Part Number: W10757086
Brand
Model Number
Description