This light bulb, also known as a drum lamp, illuminates and lights up the dryer drum when the door is open. If the light bulb in the dryer is burnt out or lighting is inconsistent, replacing it can solve this problem. No tools are required for this replacement. To repair, first locate the top section in the interior of the dryer and check the bulb. Next, unscrew the bulb by making three to four turns. Pro tip: the bulb cannot be screwed straight in, instead lean it at a 45-degree angle. Refer to the diagram provided by the manufacturer for further instruction and guidance. Remember to unplug the dryer from the power source for your safety.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
February 24, 2018
I took out the old bulb and as soon as i tried to put the new bulb in it exploded. I didn't unplug the dryer as i have never had to unplug my previous dryer to change the bulb. Why would it do that?
For model number GTD45EASJ2WS
Hello Susan, Thank you for your inquiry. You'd have to check with an electrician to be sure but for safety reasons, you should always unplug your dryer before changing the light bulb as there still could be an electrical charge in the circuit. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Elizebeth
September 30, 2021
Where is the light bulb located in the gas dryer
For model number GTDP490GD6WS
Hello Elizebeth, thank you for writing. The bulb is located in the top section in the interior of the dryer. We have attached a video for you. The number is PartSelect Number PS10063224. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Diana
December 28, 2017
My light bulb is brand new but will not go on when opening the door. How do i have to connect the cables?
For model number dhdsr46gg1ww
Hi Diana,
Thank you for your question. For information on how to install the light bulb, there is a video listed with the part on our website that you may reference as well as installation instructions that customers have left as to how they installed the part. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Vanessa
May 26, 2022
Will a light bulb 6w Indicator 120 volt fixtures work on a dryer
For model number GTDP300EM1WS
Hello Vanessa, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is 120V, 10W, PartSelect Number PS10063224. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Part Videos
Replacing your General Electric Dryer Light Bulb
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 39 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer not drying well and loud noise
Took off the front panel. Followed the repair videos provided. Everything went well. Dryer dries better and is very quiet.
Diagnostics, ordered front and back bearing. Added the belt because I was there. Parts came quickly. disassembled, shot photos of wire assemblies. Unprepared for element and lint trap housing failure as the heating element was only 1/2 functional, made followup ordered which included the green and white shims. Note, front bearing replacement does not come with wear shims, disappointing. Very inexpensive and should just be part of replacement package. Reassembled in reverse order, tricky part was the belt reinstall. New light made the repair complete.
Install would have been easier if part was an exact fit. Had to make do with part not fitting exact. Let's just say the dryer works but light won't line up.
Ordered parts and installed with YOUTUBE video. Model A little different than showed online, There was a Metal protector over the Door switch that need to be taken off before switch could be located. After detachment of dryer door, easily pushed the seal to one side to dislocate the metal protector. Would of took 30 minutes to complete if had not been for the Metal protector they added to cover the switch.
This is more a word of caution than instructions. The inlet control thermostat should be around 100 k ohms at room temp not 10 k ohms as I was quoted. I ordered one and after receiving it found out the "faulty" one and the new one were only 2 ohms difference.
The center outlet thermistor should also be around 120 k ohms at room temp. The faulty one was reading about 145 k ohms. It does heat now, and hopefully after replacing the elements it will be right again.
The drum bearing slides made a huge improvement!!
For the first time trying to repair an appliance I'd say the whole thing went fairly well, but with my mechanical and electronics backgrounds I did have an advantage. The hardest part was figuring out how to get the thing apart to get inside in the first place.
After speaking with your representative and him explaining how to me how simple it would be to switch out this light socket myself. I went on y tube went through the instructions and had to go buy a new dryer. And before you jump to any conclusions I can and do repair and and all of things around my house. I will NEVER purchase anything from you company again ander the pretense that it is so simple. This should have been told to me that an election should have done the job!!!!!! Now not only am I out the money I paid your company but I’m out the money I shelled out for a whole new dryer. I am a very angry customer and I would never recommend you to anyone!!! EVER!!!
Dryer was making very loud squeak/Squealing sounds on a consistent basis.
Fortunately I was able to watch the diy videos posted by your company which were very easy to understand. I took the dryer apart as instructed on the video and identified which parts required replacement. I ordered all the parts from you and as soon as I received everything I installed the parts and had the dryer back together in just about an hour. Great experience with your company!
I looked on you tube and was able to determine the cause and order the parts I needed to rectify the issue. I removed the the top panel and the front panel. I replaced the bearing.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Elaine T - October 27, 2021
Verified Purchase
Fast service - works great!!
I was just so happy to be able to replace the light bulb so easily! Thanks!
★★★★★
★★★★★
Julie V - April 1, 2021
Verified Purchase
Easy repair
The section for finding your appliance model was helpful for me because I wanted to make sure, what I order will be correct and I didn't have to return. First time, and a sure fit. Also, helpful for the video. Yes, changing a bulb is easy but I wouldn't think to unplug the appliance, that's helpful. I will trust all of my replacement with this company. Shipment was fast.
★★★★★
★★★★★
Kevin M - February 2, 2021
Verified Purchase
Let there be light
Order this bulb for my dryer, I ordered 3 of the bulbs the product was sent fast and on time, the only thing I thought was that they shipped each bulb in a box with with bubble wrap and then placed all 3 boxes in a large bubble sized envelope, They could of saved on shipping by wrapping all three bulbs together in one box instead of 3. Other than that great product.
★★★★★
★★★★★
Roxanne B - January 26, 2021
Verified Purchase
Replacement bulb
Received the part quickly. Packaged well and in good condition. Replaced the bulb in the drier and all is working properly.
★★★★★
★★★★★
Mary Jean M - November 4, 2020
Verified Purchase
Easy repair, easy to get to and change bulb.
The part came in swiftly and was easily changed. I now have a light back in my dryer..
★★★★★
★★★★★
Robert B - October 28, 2020
Verified Purchase
Perfect
The part was perfect. Service was even faster than expected.
★★★★★
★★★★★
Eric H - July 26, 2020
Verified Purchase
We saw the light!
This bulb was for our dryer. There was a nice video for the installation which I did not expect. All went perfectly. Thanks!
★★★★★
★★★★★
Nerisa S - May 1, 2020
Verified Purchase
The light bulb is good. Thank you
The light bulb I ordered is good.
★★★★★
★★★★★
Karen M - February 7, 2020
Verified Purchase
Lightbulb is good!
But as much as I paid for shipping it should have only taken a couple of day and not two weeks of it bouncing all around the place...I’m gonna try really hard not to do business with y’all again! That was terrible!
★★★★★
★★★★★
Avri J A - January 11, 2020
Verified Purchase
Easy installation
How many retired software engineers does it take to replace a dryer light bulb? In this case the answer was one. I took the bulb out of the box, screwed it in and it worked and it continues to work just fine. Great!!!