This blower motor, also known as the fan blower is supplied directly by the manufacturer for use in ovens. It is responsible for circulating hot air within the oven cavity. The blower motor helps dist...
This part is the replacement rack guide nut for your range. It is made of metal and is sold individually. The rack guide nut helps secure the rack guide screw. The main reason you would need to replac...
GEβs extra-large broil pan/rack set will work in all ovens and is designed to broil meat, seafood, vegetables and more. Additionally, the heat is generated from the top of the oven while set to broil...
$59.49
In Stock
Questions And Answers for ZET1PH1SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jamie
November 26, 2019
My oven light is stuck on. How do i get it to turn off?
For model number ZET1PH1SS
Hello Jamie, thank you for writing. This sounds like you have a faulty LED Light Board that needs to be replaced, part number PS12296646 for your model range. Until the unit is repaired, you may want to just unplug it when it is not in use. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
β
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
It took a while to remove approx 30 screws to get to the blower. So my oven was sitting, torn apart while I waited on the new blower fan that I had ordered. It arrived shortly, about 5 days. When I opened the box I saw that PARTSELECT had sent me a drain pump instead of the blower fan that I had ordered. Since an oven does not require a d
... Read morerain pump and it wouldn't work to replace my broken blower fan I had to return it. I was told that I needed to send the part back in order to get a refund. After I sent their drain pump back at a cost of $13 they emailed me and said I didn't need to send the drain pump back. And they refunded me minus shipping So I had to pay shipping both ways for a part that was wrong. And I ordered it from someone else. I put the new blower fan that I had bought from another company in and replaced the 30 screws. And the oven has been working fine ever since. Thank you PARTSELECT for allowing me to tell people how you operate. They have a money back guarantee, but they don't give you back ALL your money. Thanks Again.
Turn power off to oven, removed screws holding oven into cabinet, get assistance to remove oven, I used 2 dinner table chairs to set the oven on, be careful as the front of the oven is heavier than the back. Removed the back sheet metal covers, about 20 screws or so. Removed Fan motor, replaced with new fan motor, and reversed installed.
... Read moreOven works great.