Models > ZBD1850N00II > Instructions

ZBD1850N00II General Electric Dishwasher - Instructions

All Instructions for the ZBD1850N00II
1 - 15 of 28
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheels had come off and were broken
We ordered a whole new set for the lower rack and even though they were smaller than the original ones, we replaced them all and now the rack slides in and out of the dishwasher with ease!
Parts Used:
Lower Rack Wheel and Stud
  • Christina from Canton, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
23 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
teenagers abusing the dishwasher
the repair was simple the wheels snapped on and the rails screwed right off if your shopping around look no further this site is great
Parts Used:
Lower Rack Wheel and Stud Upper Rack Wheel Guide Rail Bracket Assembly
  • matt from fresno, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
13 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Silverware basket had holes in it.
Took old one out and replaced new one in less than one minute.

Very easy and easy to order also.
Parts Used:
Basket Assembly Silverware
  • Pauline from Oceanside, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
added replacement wheels to lower rack
put them on
Parts Used:
Lower Rack Wheel and Stud
  • Joseph from Columbia, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken wheels on lower rack
A couple of lower rack wheels had fallen off, making it extremely difficult to roll the rack in and out. Putting on the new wheels was just a matter of popping them on and giving a sturdy push until they "clicked." Everything works perfectly now.
Parts Used:
Lower Rack Wheel and Stud
  • STEPHANIE from NEW YORK, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lower rack wheels
Remove and replace broken wheels by hand, simple.
Parts Used:
Lower Rack Wheel and Stud
  • Calvin from VISALIA, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no part number and incorrect info from manufacturer
the repair was not the issue: finding the proper part was. the part listed by Frigidaire is not correct but with the help of your phone service associates and the east to navigate web site, I was able to locate the parts. thank you for everything....all in all, the experience was a good one.
Parts Used:
Lower Rack Wheel and Stud
  • Belinda from Briarwood, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken stud on original equipment whee,
Popped the old ones off and inserted the new ones. Though they are smaller the stud is fixed and not likely to separate.Works like a charm.Would shop here again
Parts Used:
Lower Rack Wheel and Stud
  • Thomas from Cayucos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom of basket deteriorated
Remove old basket, discard, place new basket in dishwasher, fill with dirty silverware, run wash cycle.
Parts Used:
Basket Assembly Silverware
  • George from Gregory, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Roller wheels on lower dish basket were worn and broken
Removed old roller with pilers and pop in New roller really easy very happy partselect had right rollers it made it easy
Parts Used:
Lower Rack Wheel and Stud
  • Jose from HOUSTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels broken
Just popped the old wheels off with small tack hammer very easy to get off and pop back on in a couple minutes..
Parts Used:
Lower Rack Wheel and Stud
  • thomas from TINLEY PARK, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two wheels broke off
knocked the broken piece off and snapped the new wheels on - easy breezy.
Parts Used:
Lower Rack Wheel and Stud
  • Carol from WALSENBURG, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
holes in dishwasher silverware basket
removed old basket, put new one in
Parts Used:
Basket Assembly Silverware
  • Deborah from Los Osos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The basket handle was broken in transit.
I ordered the silverware basket because the original started to separate. The shipment box was damaged and sure enough the handle was broken. The handle can be removed so I replaced the new handle with the old handle, since it was the basket that really needed. Pops off very easily.
Parts Used:
Basket Assembly Silverware
  • John from ANN ARBOR, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced the micro filter
Just tool out the old micro filter and put in the new filter.
Parts Used:
MICROFILTER
  • Sophie from HOLYOKE, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ZBD1850N00II
1 - 15 of 28