Models
>
Z4218
Z4218 ((2007-04)) Husqvarna Lawn Mower - Overview
Sections of the Z4218
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
In Stock
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
$8.71
In Stock
Blade High Lift
PartSelect #: PS9015048
Manufacturer #: 532180054
This is an OEM replacement part, sold individually.
The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging t...
$17.43
In Stock
Idler Pulley, Flat
PartSelect #: PS9031679
Manufacturer #: 539110311
This is an OEM replacement part for various models of lawn mowers. The Idler Pulley is used to apply tension to the blade belt, allowing the belt to turn. It has an O.D. of approx. 2.75 inches, is ma...
$13.69
In Stock
Lawn Tractor Ground Drive Belt
PartSelect #: PS9288485
Manufacturer #: 539110411
(1/2 x 56-5/16-inch)
This ground drive belt is for lawn tractors.
Ground drive belt turns the transmission pulley to move the tractor.
Wear work gloves to protect your hands when installing this part.
$33.15
In Stock
Mandrel Assembly
PartSelect #: PS12116539
Manufacturer #: 587820301
This mandrel assembly is for lawn tractors.
Mandrel assembly attaches to the mower deck and spins the blades. The assembly may include multiple parts; refer to your parts diagram for a complete lis...
$48.56
In Stock
Mandrel Pulley Assembly
PartSelect #: PS9015257
Manufacturer #: 532195945
This mandrel pulley is for lawn tractors.
Mandrel pulley spins the blade on the mower deck of the tractor.
Wear work gloves to protect your hands when installing this part.
$11.20
In Stock
Questions And Answers for Z4218
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Deflector shield cracked. Need to replace.
Mark the location of the spring so you know how it goes on. Snip off the push nut holding the deflector shield pin. Hammer the pin out. Insert the pin with the spring holding the new deflector shield. Use a socket to steady the push nut and hammer the pin into the push net until secure.
Parts Used:
-
Travis from PLATTE CITY, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!