Models > YKERS807SS04

YKERS807SS04 KitchenAid Range - Overview

Sections of the YKERS807SS04

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Oven Rack – Part Number: WPW10179152
Oven Rack
★★★★★
★★★★★
(17)
PartSelect #: PS11749669
Manufacturer #: WPW10179152
This oven rack is chrome in color and is approximately 24.76 inches wide by 15.78 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined...
$84.88
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.79
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
  In Stock
Temperature Sensor – Part Number: WPW10131825
Temperature Sensor
★★★★★
★★★★★
(7)
PartSelect #: PS11748765
Manufacturer #: WPW10131825
The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty tempe...
$89.97
  In Stock
Element, Broil – Part Number: WP9760774
Element, Broil
★★★★★
★★★★★
(25)
PartSelect #: PS11747304
Manufacturer #: WP9760774
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts. This part works with the following...
$191.89
  In Stock
Terminal Block – Part Number: WPW10245259
Terminal Block
★★★★★
★★★★★
(17)
PartSelect #: PS11750972
Manufacturer #: WPW10245259
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness...
$34.09
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
  In Stock
Range High-Limit Thermostat – Part Number: WP9759242
Range High-Limit Thermostat
★★★★★
★★★★★
(16)
PartSelect #: PS11747248
Manufacturer #: WP9759242
This thermostat is also known as a thermal cut-off fuse and is used in conjunction with your range. This part establishes and maintains the internal temperature of the oven cavity. When the temperatur...
$126.36
  In Stock
Light Bulb - 120-130V - 15W – Part Number: WP4173175
Light Bulb - 120-130V - 15W
★★★★★
★★★★★
(4)
PartSelect #: PS11742328
Manufacturer #: WP4173175
This part is a light bulb that is 120-130 volts and 15 watts, and is used in conjunction with your range or wall oven. The function of this bulb is to illuminate the interior of the oven.Before making...
$47.60
  In Stock
Temperature Probe – Part Number: WP9755542
Temperature Probe
★★★★★
★★★★★
(3)
PartSelect #: PS11747165
Manufacturer #: WP9755542
Also known as a meat probe.
$92.83
  In Stock
Screw – Part Number: WP3400832
Screw
PartSelect #: PS11741605
Manufacturer #: WP3400832
This screw is sold individually.
$5.42
  In Stock
Rear Leveling Leg – Part Number: WPW10058460
Rear Leveling Leg
PartSelect #: PS11748094
Manufacturer #: WPW10058460
Sold individually.
$11.06
  In Stock

Questions And Answers for YKERS807SS04

Ask our experts a question about this model and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
February 10, 2020
Oven is not keeping temperature while cooking and sometimes looses all heat?
For model number YKERS807SS04
PartSelect logo
Hello and thank you for writing. It certainly sounds like it could be a faulty thermostat PS11747248 and/or possibly a malfunctioning temperature sensor PS11748765 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
Related Parts:
Susan
February 10, 2020
My oven only works if in convect mode.
For model number YKERS807SS04
PartSelect logo
Hello and thank you for writing. If the oven will not set to just the baking mode, the oven may have the auto convection feature and might be stuck in that mode. We suggest to try a hard reset: Go to your breaker box and shut the breakers for your unit off, wait 5 minutes and then turn the breaker to on again. That should hopefully clear this problem. If this does not fix this problem then your PS11749720 might be faulty and possibly needs to be replaced. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
Related Parts:
Ed
March 6, 2024
One of my burners is not coming on It is the 2 range type at the front leftI think it could be the element gone The switch at the front is showing a red light do I need the part numberPS11751668
For model number YKERS807SS04
PartSelect logo
Hi Ed, thank you for reaching out. Before replacing the surface element, we would suggest replacing the surface element control switch. The left front surface element control switch for your model is part number PS11747407. It turns the surface element on and off and controls how much heat the element produces. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the YKERS807SS04

[Viewing 10 of 10]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing Fixing
Show All
Will not program
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Self Cleaning blows the thermostat fuse
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.

First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.

This repair would have cost $164 through A&E factory service.
Parts Used:
Range High-Limit Thermostat
  • Joseph from Worthington, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
136 of 154 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Power shut down and door lock-up after self-cleaning
My wife used the self cleaning function for the first time after 1.5 years of owning, of course out of warranty. A quick google search identified the problem. Called Kitchenaid, they said of course it can't be that simple, they had never heard of this problem, need to schedule a service call. Googled and found this site, Ordered the part, came in, only took a screwdriver and about 20 minutes, just like all the other posts.

shame on Kitchenaid for not owning up to the problem. I even e-mailed them all the links, they did not acknowledge them.
Parts Used:
Range High-Limit Thermostat
  • john from new market, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
50 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned terminal block and filter board
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Parts Used:
Terminal Block
  • Joseph from Decatur, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
90 of 192 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!