Models > WML55011HS3 > Symptoms > Won’t turn on

Parts That Fix Whirlpool Microwave WML55011HS3 Won’t turn on

Won’t turn on is a commonly reported symptom for the WML55011HS3 Whirlpool Microwave, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your WML55011HS3 Whirlpool Microwave that will fix Won’t turn on. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 R CERAMIC FUSE,20A/250V,MHC
Fixes Symptom 99% of time
R CERAMIC FUSE,20A/250V,MHC – Part Number: W11707984
★★★★★
★★★★★
5 Reviews

Rated by 5 customers 

  

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.   

$ 24.73
  In Stock
PartSelect Number PS17629444
Manufacturer Part Number W11707984

Customer Repair Stories

machine was dead.

After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "Part Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)
Read less
  • Mark from Smithtown, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Microwave wouldn't turn on and found breaker been tripped and then microwave wouldn't turn on at all.

Read some instructions and easily found the fuse. Replaced it. Still didn't work. Took control panel off to check door switches. Nothing I read mentioned a second fuse. Tested and it to had blown. Ordered another one. Popped them in. Done.
  • Daniel from DECATUR, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
19 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top