Models > WM3488HW

WM3488HW LG - Overview

Models starting with WM3488HW

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Washing Machine Drain Pump – Part Number: 4681EA2001T
Washing Machine Drain Pump
★★★★★
★★★★★
(264)
PartSelect #: PS3579318
Manufacturer #: 4681EA2001T
The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after...
$74.11
  In Stock
Water Inlet Valve - Hot – Part Number: 5220FR2006H
Water Inlet Valve - Hot
★★★★★
★★★★★
(82)
PartSelect #: PS3527427
Manufacturer #: 5220FR2006H
The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow...
$26.80
  In Stock
Magnetic Door Plunger – Part Number: AGM73610701
Magnetic Door Plunger
★★★★★
★★★★★
(61)
PartSelect #: PS3618292
Manufacturer #: AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door ...
$24.28
  In Stock
Rear Tub Gasket – Part Number: 4036ER2004A
Rear Tub Gasket
★★★★★
★★★★★
(15)
PartSelect #: PS3522855
Manufacturer #: 4036ER2004A
If you notice your washing machine is leaking water from the top of the transmission, it might be due to the gasket being damaged or worn down. When replacing your gasket, consider replacing your tub ...
$31.60
  In Stock
Washer Tub Bearing, Rear – Part Number: MAP61913707
Washer Tub Bearing, Rear
PartSelect #: PS11711138
Manufacturer #: MAP61913707
This tub bearing is for washers. Tub bearing supports the spin basket shaft at the tub. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
$37.33
  In Stock
Washer Tub Bearing – Part Number: MAP61913708
Washer Tub Bearing
★★★★★
★★★★★
(1)
PartSelect #: PS11711139
Manufacturer #: MAP61913708
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
$48.20
  In Stock
Pump Filter – Part Number: 383EER2001A
Pump Filter
★★★★★
★★★★★
(10)
PartSelect #: PS3522306
Manufacturer #: 383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your wa...
$26.76
  In Stock
Locking Pin – Part Number: 4774FR3118B
Locking Pin
★★★★★
★★★★★
(2)
PartSelect #: PS3523451
Manufacturer #: 4774FR3118B
This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made ent...
$14.48
  Special Order
CAP,DRAIN HOSE – Part Number: 5006EN3015A
CAP,DRAIN HOSE
★★★★★
★★★★★
(5)
PartSelect #: PS3635866
Manufacturer #: 5006EN3015A
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
$8.04
  In Stock
BEARING,BALL – Part Number: MAP61913727
BEARING,BALL
★★★★★
★★★★★
(1)
PartSelect #: PS12389216
Manufacturer #: MAP61913727
This is known as a tub bearing or a rear bearing, and it is part for your washing machine. The function of this bearing is to be a support for the spin basket shaft that is located at the back of the ...
$58.46
  In Stock
Clamp – Part Number: 4861FR3068A
Clamp
PartSelect #: PS3524032
Manufacturer #: 4861FR3068A
$9.88
  In Stock
Hose,Connector – Part Number: 5214FR4006G
Hose,Connector
★★★★★
★★★★★
(1)
PartSelect #: PS3527289
Manufacturer #: 5214FR4006G
This part is the replacement connector hose or clean-out drain hose for your washer. It is black in color and is sold individually. The connector hose drains water out of the washer if the drain cycle...
$12.30
  In Stock
View More
Back to Top

Common Symptoms of models starting with WM3488HW

[Viewing 11 of 11]
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Draining Issues
Fixed by
these parts
Fixing
Show All
Engine runs but does not pump water
Fixed by
these parts
Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Washing Machine Drain Pump

Replacing the Washing Machine Drain Pump

Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Hot

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washing maching wouldn't drain
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Read less
Parts Used:
Washing Machine Drain Pump
  • Jorge from Apple Valley, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
559 of 712 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Read less
Parts Used:
Magnetic Door Plunger
  • Omnitech from Warrenville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
153 of 169 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy operation, sometimes did not drain, gave OE code
Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman.
Parts Used:
Washing Machine Drain Pump
  • Michael from RALEIGH, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
47 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top