Models > WFG320M0BB0 > Symptoms > Little to no heat when baking

Parts That Fix Whirlpool Range WFG320M0BB0 Little to no heat when baking

Little to no heat when baking is a commonly reported symptom for the WFG320M0BB0 Whirlpool Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your WFG320M0BB0 Whirlpool Range that will fix Little to no heat when baking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Oven Sensor
Fixes Symptom 75% of time
Oven Sensor – Part Number: WPW10181986
★★★★★
★★★★★
36 Reviews

Rated by 14 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.

$ 94.68
  In Stock
PartSelect Number PS11749737
Manufacturer Part Number WPW10181986

Replacing your Whirlpool Range Oven Sensor

Replacing your Oven Sensor

Customer Repair Stories

Oven stuck in cleaning mode

Google the error code that the range was displaying and found others with the same symptoms. Then found several people that had fixed the problem by replacing the oven sensor. I then ordered the sensor and replaced it, which fixed the problem.
  • Hal from Santa Rosa, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
46 of 86 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

temperature not accurate after 3 1/2 years of happy usage

Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
Read less
  • Ruth from Oregon, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
137 of 245 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Igniter-OVEN
Fixes Symptom 25% of time
Igniter-OVEN – Part Number: W10918546
★★★★★
★★★★★
53 Reviews

Rated by 27 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

This flat style gas oven igniter has ceramic housing and comes with a connector.

$ 69.04
  In Stock
PartSelect Number PS11770066
Manufacturer Part Number W10918546

Customer Repair Stories

The igniter would turn orange but wouldn't fire up, so the oven wouldn't heat up.

I just unscrewed the old one out, which was 2 screws and screwed this one in. But the thing that was best of all was how fast the part came in. It literally came the next day.
  • Lisa from Livermore, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
28 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

our oven would not heat up

My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are very very happy with our decision to replace the part ourselves unstead of spending extra money we didnt have .
Read less
  • sharnette from baltimore, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
91 of 104 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top