Models > WEG515S0FS0 > Symptoms > Little to no heat when baking

Parts That Fix Whirlpool Range WEG515S0FS0 Little to no heat when baking

Little to no heat when baking is a commonly reported symptom for the WEG515S0FS0 Whirlpool Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your WEG515S0FS0 Whirlpool Range that will fix Little to no heat when baking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Bake Igniter
Fixes Symptom 81% of time
Bake Igniter – Part Number: WP9758079
★★★★★
★★★★★
37 Reviews

Rated by 18 customers 

  

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This part ignites the gas to light the oven burner.

$ 57.35
  In Stock
PartSelect Number PS11747217
Manufacturer Part Number WP9758079

Customer Repair Stories

Oven would not maintain temperature

Replaced igniter
  • Edward from Rock Falls, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
33 of 67 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Bake/broil would not work

Replaced igniter and also DSI/direct spark igniter did not fix problem. Called out repairman turned out to be bad gas valve. Replaced that part , now stove works fine.
  • Greg from North Baltimore, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
77 of 120 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 SENSOR
Fixes Symptom 19% of time
SENSOR – Part Number: W10833885
★★★★★
★★★★★
4 Reviews

Rated by 2 customers 

  

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This is a manufacturer-made oven temperature sensor for various models of range. This sensor is designed to accurately detect the internal temperature of your oven and communicate with the control board to control the level of heat inside of it. Over time and through extended exposure to hot temperatures, this sensor can fail and cause your oven to have issues heating or staying at a consistent heat level, at which point it needs to be replaced. This sensor features a wire harness to connect to the control board of the oven, as well as two mounting screws to install it. Replacing this sensor is easy and only requires a screwdriver to unthread it from the lower portion of your oven. This sensor is sold on its own, and does not come with any other necessary parts, like its securing screws.

$ 125.82
  In Stock
PartSelect Number PS11726314
Manufacturer Part Number W10833885

Customer Repair Stories

Oven temperature was WAY off, sometimes 50 degrees.

Turned the breaker off. Removed the racks, pulled the oven out and removed the back. Disconnected and unscrewed the old sensor from the back, connected and screwed in the new one. Returned the racks and slid the oven back in.

The only remotely challenging part was disconnecting the old sensor. I had to figure out where to press with the flat screwdriver to get it to release.

I had found a good YouTube video and didn't use the app.
Read less
  • Sarah from Raleigh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top