Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WD-3245RHD

WD-3245RHD LG Washer Dryer Combo - Overview

Get Parts and Repair Help for WD-3245RHD

If you know the washer dryer combo repair part you need, you can browse the list of all parts on the WD-3245RHD, or you can search by name or part description. You can also find your part by where it is located on the WD-3245RHD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer dryer combo. We’ve also included any installation videos we have for WD-3245RHD parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$69.64

Drain Pump and Motor Assembly

The drain pump and motor assembly may also be known as the washer drain pump, and is a part for your washer. The function of this assembly is to help expel water from the washing m...

Order within the next 4 hrs and your part ships today!
$22.05

Water Inlet Valve - Hot

The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may leak, fill slowly, or not fill at all. To test your valve, unplug the washer when the symptom occurs. If the washer continues to fill, then your inlet valve is defective. This part is approximately 3 inches long x 3 inches wide.

Order within the next 4 hrs and your part ships today!
$26.42

BEARING,BALL

This bearing, or ball, is a genuine OEM replacement part for your washer. The bearing allows the tub to rotate smoothly. Replacing this part can be helpful if your washer is extrem...

Order within the next 4 hrs and your part ships today!
$4.35

Cap,Drain Hose

This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before beginning this repair, make sure the power and water sources to your washer are shut off. To access the pump housing, open the pump filter cover, pull out the drain hose, remove the old plug and replace it, first draining the remaining water from the drain hose.

Order within the next 4 hrs and your part ships today!
$22.05

Bearing,Ball

Tub bearing supports the spin basket shaft at the bottom of the washer tub. If your tub bearings are damaged or faulty, the washer will run noisier than usual during the spin cycle...

Order within the next 4 hrs and your part ships today!
$28.71

Sensor Assembly

Order within the next 4 hrs and your part ships today!
$4.35

Clamp

Order within the next 4 hrs and your part ships today!
$4.35

Holder

Order within the next 4 hrs and your part ships today!
$5.72

Bolt Assembly

Order within the next 4 hrs and your part ships today!
$11.85

Thermistor,NTC

Order within the next 4 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Washing maching wouldn't drain

  • Customer: Jorge from Apple Valley, CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 468 of 598 people found this instruction helpful
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just... read more

noisy operation, sometimes did not drain, gave OE code

  • Customer: Michael from RALEIGH, NC
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 20 people found this instruction helpful
Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman. read more

Water was filling continues even the machine was unplugged

  • Customer: Sanjay from HOLTSVILLE, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 11 of 13 people found this instruction helpful
I did repaired while looking at video at your site .thanks to your team .. read more