Models
>
WCXH214H1WW
WCXH214H1WW General Electric Washer - Overview
Sections of the WCXH214H1WW
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Drain Pump
PartSelect #: PS271336
Manufacturer #: WH23X10016
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
No Longer Available
SCREW 8-18 X .31
PartSelect #: PS299875
Manufacturer #: WR2X9494
This screw is sold individually. Size 8 - 18 x 0.31
$35.41
Special Order
Drive Belt
PartSelect #: PS269367
Manufacturer #: WH08X10003
This drive belt contains 6 ribs.
No Longer Available
Questions And Answers for WCXH214H1WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the WCXH214H1WW
[Viewing 4 of 4]Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The water pump becomes very noisy
This is the second time in the same 7 year old appliance. Remove the front bottom cover by removing 2 screws. Then remove the 2 screws holding the pump down. Then unclip the electrical wire from the pump and remove both hoses from the pump by squeezing the spring clamps with a pliers. Have a pan to collect the water that will drain fr
... Read more
om the lines. Take the new pump and install it in reverse order from above.
Read less
Parts Used:
-
Roger from Hudson, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
13 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door catch broken
I paid a plumber $150 to replace this part a year ago. I simply took the screws out,ordered the part,paid for 1 day shipping, and screwed the new part on. The washer DID NOT WORK without this part,and worked perfectly the minute I replaced it.
Parts Used:
-
Jennifer from South Chatham, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not pump out the water and odd noise
removed front lower panel to access pump assy,removed the pump hold down scews and then moved the two hose clamps back then took out assy,just reverse the process to install,always disconnect power and turn off water supply to unit before any service is done
Parts Used:
-
Carlson from Chicago, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
8 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!