Enter the code TAKE10OFF at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on May 28 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Easy instal, taking off entire back panels of appliance is required
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine. Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install pump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Top Load washer would not drain to complete spin cycle.
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump, a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump. Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
I call Part Select and spoke with Shawn in March ,2023 ,i told him what the washer had the problem , Shawn explained to me and order 4 Suspension Rod for me , we changed them after received it and works perfect. I had ordered the part for our refrigerator and another washer before, when we changed the parts , it worked perfect , that is why i order the parts for our appliance when we need from PARTS SELECT
Plastic assembly rod from jet washer basin to washer top lid broke
Removed the plastc clip from the washer basin side that was not broken and removed the basin...slipped the new basin in place, inserted plastic clip holders...too more thought than skill as no instructions were included with the part.
Pulsator Cap came off during a Wash cycle, it was not usable as part of it was broken
just popped the new one in, it took all of 3 seconds....the worst part was that the part was all Plastic and the replacement part cost close to $70 including Shipping. the part was no bigger than the Cap on a LG bottle of Orange Juice.....Ridiculous..