Models > WA50M7450AP > Instructions

WA50M7450AP Samsung Washer - Instructions

All Instructions for the WA50M7450AP
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Easy instal, taking off entire back panels of appliance is required
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine.
Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install pump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Parts Used:
Washer Drain Pump Assembly
  • Dieter from CHICAGO, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top Load washer would not drain to complete spin cycle.
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump, a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump.
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Parts Used:
Washer Drain Pump Assembly
  • Greg from Medina, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pulsator cap broke off.
The cap was easily replaced by hand and pops right in place.
Parts Used:
PULSATOR CAP;ALL USA MODEL(EXCEPT 3000J)
  • tommie from MURFREESBORO, TN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer was unbalance
I call Part Select and spoke with Shawn in March ,2023 ,i told him what the washer had the problem , Shawn explained to me and order 4 Suspension Rod for me , we changed them after received it and works perfect.
I had ordered the part for our refrigerator and another washer before, when we changed the parts , it worked perfect , that is why i order the parts for our appliance when we need from PARTS SELECT

All Representative are very helpful , thank you !
Parts Used:
Washer Suspension Rod
  • Wai from SAN MATEO, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pulsator Cap came off during a Wash cycle, it was not usable as part of it was broken
just popped the new one in, it took all of 3 seconds....the worst part was that the part was all Plastic and the replacement part cost close to $70 including Shipping. the part was no bigger than the Cap on a LG bottle of Orange Juice.....Ridiculous..
Parts Used:
PULSATOR CAP;ALL USA MODEL(EXCEPT 3000J)
  • donald from ROCHESTER, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer will not drain
Went to YouTube video and followed instructions.

Hardest part was making sure water from hose does not flood floor while taking it off from water pump and letting water drain in bucket.

See YouTube video

https://youtu.be/oOnxbj-unfc?si=OFFwOcNiIymh_9b-
Parts Used:
Washer Drain Pump Assembly
  • Alpha from JACKSONVILLE, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WA50M7450AP
1 - 6 of 6