Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
$90.12
In Stock
Order within the next 7 hrs and your part ships today!
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is...
$10.75
In Stock
Order within the next 7 hrs and your part ships today!
This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige...
$12.64
In Stock
Order within the next 7 hrs and your part ships today!
The foot pedal on your trash compactor is located at the bottom of the unit. This part, when compressed, allows the container drawer on the trash compactor to slide in and out. If your current foot pe...
Order within the next 7 hrs and your part ships today!
Questions And Answers for UCG1680LSS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
March 6, 2020
The drawer roller wheel on the bottom right side rail has come apart and fallen off. I believe i have found the correct part on your website. It looks like the bolt on the back side must be taken off to replace the part. The access to the bolt is too small for access with a wrench. How does one get the damaged part off?Thank you,
dave
For model number UCG1680LSS
Hello and thank you for writing.
To replace
a container drawer roller PS12722845 in your trash
compactor first depress the foot pedal
pull the container juror assembly
forward lift it off of the track and set
the assembly on a sturdy surface use a
9/16 inch socket to unthread the roller
mounting nut and pull the old roller off
of the rail install the new container to
our roller by inserting it into the rail
then thread and tighten the mounting nut
to secure reposition the container to our assembly
on the track and confirmed that it moves freely. We hope this information helps. Please contact us anytime if you require further assistance.
Is there a handle for this model. There appears to be a recess for the fasteners on the inside of the door. It would be nice to be able to open and close it by the handle.
For model number UCG1680LSS
Hello Todd, Thank you for the question. Checking the model number provided, this appliance does not come equipped with a handle. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor work
... Read moreed fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
Followed YouTube instructions. Was relatively easy to dismantle, though on this GE Profile model compactor, needed to partially undo the front panel to provide room to remove the RAM. Works great now!!