Models > TS242

TS242 ((2015-04)) Husqvarna Lawn Mower - Overview

Sections of the TS242

[Viewing 1 of 1]
Diagram and Parts List for (2015-04) Husqvarna Lawn Mower
Keep searches simple, eg. "belt" or "pump".
Bearing – Part Number: 532009040
Bearing
★★★★★
★★★★★
(3)
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$6.21
  In Stock
Ring Klip Number T5304-75 – Part Number: 812000029
Ring Klip Number T5304-75
★★★★★
★★★★★
(1)
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It i...
$3.99
  In Stock
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
  In Stock
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
(2)
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
  In Stock
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
Cap Axle Black 1 50 x 1 00
★★★★★
★★★★★
(1)
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.99
  In Stock
V-Belt-Drive – Part Number: 532130969
V-Belt-Drive
★★★★★
★★★★★
(1)
PartSelect #: PS9009376
Manufacturer #: 532130969
  No Longer Available
Washer Hardened – Part Number: 532188967
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
  In Stock
Bearing-Ball-Mandrel – Part Number: 532110485
Bearing-Ball-Mandrel
★★★★★
★★★★★
(1)
PartSelect #: PS9285698
Manufacturer #: 532110485
$11.20
  In Stock
Pulley Idler – Part Number: 532196106
Pulley Idler
★★★★★
★★★★★
(2)
PartSelect #: PS9287043
Manufacturer #: 532196106
This blade idler pulley (part number 196106) is for lawn tractors. Blade idler pulley 196106 applies tension to the blade belt, allowing the belt to turn.
$26.14
  In Stock
Washout Port – Part Number: 532415598
Washout Port
★★★★★
★★★★★
(2)
PartSelect #: PS9023060
Manufacturer #: 532415598
$8.71
  In Stock
Link Lift Susp. Front Mower – Part Number: 532195270
Link Lift Susp. Front Mower
★★★★★
★★★★★
(1)
PartSelect #: PS9021232
Manufacturer #: 532195270
  No Longer Available
Pin Cotter 7/16 Bow Tie Lock – Part Number: 532194209
Pin Cotter 7/16 Bow Tie Lock
PartSelect #: PS9020881
Manufacturer #: 532194209
$3.99
  In Stock
View More
Back to Top

Questions And Answers for TS242

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it functions properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Read less
Parts Used:
V-Belt-Drive
  • Lynn from BOILING SPGS, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
17 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read less
Parts Used:
Ring Klip Number T5304-75 Cap Axle Black 1 50 x 1 00
  • Anthony from OLIVEHILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
13 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original shield was damaged
Removed original shield ( 2 bolts), replaced with new shield.
Parts Used:
Shield
  • Wayne from LAKEVILLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top