The Clutch Drum is a silver, metal part used to transmit power from the engine to the drive shaft. Installation is rated "Medium" difficult and will require a screwdriver, wrench set, and torx wrenche...
$47.91
In Stock
Questions And Answers for TB146EC
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
February 28, 2023
I have replaced the clutch assembly and gearbox (transmission) and tines will not turn.
For model number TB146EC
Hi Bill, thank you for getting in touch. Based on our research, clevis pins, part number PS10003074, connect the tines to the driveshaft. They are made of a specific grade of metal and designed in a way that they will break if a certain amount of force is applied, which helps to protect the gearbox or transmission from damage. If one or more clevis pins break on your tiller, they will prevent the tines from turning and will need to be replaced. We hope this is what you were looking for!
Hi Kenneth, thank you for reaching out. According to our research, we would suggest you clean the carburetor assembly, and extra oil in the engine that can cause the oil to foam and blow out through the breather, feeding into the air filter. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.