This is a cooktop burner igniter that is compatible with various makes and models of cooktops and ranges and is sold as an individual part. This part creates a spark that ignites the burner within you...
This spacer kit, also known as a grate foot kit, is a set of four padded feet designed to protect your burner grates and prevent scratches on the cooktop. Typically located at the bottom corners of th...
This O-ring burner seal or gasket prevents gas leakage and keeps your cooktop free from spills and moisture. It is made of durable, heat-resistant material for a reliable and airtight seal. Usually lo...
This nut is designed for use with different makes and models of ranges and cooktops and is a genuine OEM part. This nut is 1mm thick and is 22-threads-per-inch, and is made of high-quality, durable st...
This spark switch is also commonly referred to as an igniter switch, or a burner ignition switch. This part is used on ranges and cooktops, this part makes the spark required to ignite the burners in ...
This cooktop seal is an essential OEM replacement part used in range cooktops. It is a rubber strip that fits between the cooktop and the burner skirt and prevents gas and other materials from leaking...
This OEM-verified venturi tube, found in your range, blends gas and air to create the proper fuel-air mixture for combustion. It is alternatively known as a gas tube connector or surface burner tube. ...
This is a fixing kit for a gas range or cooktop, it is also known as a spark module. It is a six-point gas re-igniter with flame rectification. A spark module is used to create the spark that ignites ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
July 4, 2023
When was this model produced
For model number SGC304R
Hi Kevin, thank you for contacting us. According to our research, your model was manufactured most probably in the year 2000. For more specific information, please provide us with the serial number of the unit. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I has to file the bottom edge on a slight angle so the lens would fit in the hole. Also I had to file the top edge cause it had little tabs and and also had to file the edge below the top of the lens then it would snap in so I have to say the woman I talked to said she guaranteed me it would fit and it didn't