All Installation Instructions for Jenn-Air Range SEG196

Broken knob

Replaced the knob.

Parts Used:

Gas Valve Knob

Raymond from Casselberry, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

circuit breaker blew

I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in about 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.

Parts Used:

Main Power Terminal Block

Richard from Sarasota, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

glass in oven door was broken

We took the door off, you have to be careful of the hinges popping back. We put small screwdrivers on each side and held the hinges out, this made the door easy to just stand up and slide back on the hinges. The glass replacement was simple just a few screws. We spent $127.00 on the part and shipping and a new wall oven would have cost us $1500.00. Thanks for making this part available.

Parts Used:

Interior Window Assembly

Vonnie from Indian Rocks Beach, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Missing Knob

PartSelect was the RIGHT solution. The website interface was perfect, the ordering process user freiendly, email updates on the order status was tremendouly accurate and timely, and lastly the part arrived quicker than expected and fit as desired. WAY TO GO ParSelect! I will use you again as the need arises. AM

Parts Used:

Gas Valve Knob

Allen from Centerville, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

replacing old parts

wanted a fresh clean look on the burners since they were old and getting dirty and blackened from use. Easy to replace with new one.

Parts Used:

Front Burner Assembly - Black (Glossy Finish)

Debra from Carlstadt, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Range burner melted plastic jar and became clogged

Found the part number on an old box, ordered the part and it arrived next day. Installed easily and is working perfectly.

Parts Used:

Front Burner Assembly - Black (Glossy Finish)

Harry from Cambria, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

Light bulb failure

Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.

Parts Used:

Light Bulb - 40W

Grant from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

old burners wouldn't light

took old burners out, installed new ones . I was very easy and if i could do it anyone can. I used a rachet and thats the only tool i needed

Parts Used:

Front Burner Assembly - Black (Glossy Finish)

Rear Burner

BOB from hartford, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

Replaced worn seal

Remove the door. Place small screwdriver in each door arm to prevent extraction. Remove approx 20 screws. Remove the seal. Replace the new seal. you will need help in holding the seal in place until you car install at least two screws. Very straight forward. Took 20 minutes. Even a cave man can do it.

Parts Used: