RS581SS Amana Microwave - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
tray glass floor broke
Remove old tray, clean old caulk, and clean inside of microwave, Place new tray-glass floor and caulk with heat resistant silicone. Easy project.
Parts Used:
-
Eduardo from baltimore, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken tray-glass floor of microwave
very simple job. removed broken tray, inserted new tray and caulked around edges with a high heat resistant caulk.
Parts Used:
-
ted from lagrange, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic clip caused the rack to arc to the side of the cavity.
Pulled out the old clip and pushed in the new one. Only tool was my fingers and took about 20 seconds. This was after the Sear's web page said the part was no longer available and no replacement was listed.
Thanks to partselect.com I saved the microwave for another couple years.
Thanks to partselect.com I saved the microwave for another couple years.
Parts Used:
-
John from Marietta, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!