Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Condensor fan was not functioning propperly
Unplugged Unit Removed back cover removed fan assembly removed fan balde opened motor case replaced motor sealed the motor case fastened to fan shroud re installed fan blade re attacehd to frig- Carefull of the coolant lines Plugged in motor assembly Replaced back cover Re Plugged in Frig to AC outlet.
Barely losened the two rear screws. Took out the two front screws and the ice maker slides toward front of fridge off the 2 rear screws. Unhooked the wiring plug. Replaced with new ice maker.
unplugged first, then Pulled out frig and took out fan motor. plugged in to be sure it worked. waited few minutes and it started running. then placed everything back where it belonged. Talked to appliance store and told me what the problem was but it would take longer for them to get then for me to order on line. Best way to get it done... No directions on box...
Using the putty knife, pry off the faceplate for the ice/water dispenser. Disconnect the wire harness. Using philips head screwdriver, remove the dispenser assembly. Remove the old dispenser and replace. Reverse for reassembly. Note * I should have bought the water dispenser lever and replaced it as well since I had the assembly out. Secondary note * be mindful during reassembly to not put pressure on the water dispenser or have a glass handy. :)
Ice tray had cracked and broken. The water is still not filling up my ice tray.
The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.
*** The problem I'm having now is the water is not filling up the tray*** Not sure what I did wrong? Any help would be greatly appreciated!!!
