Models > RRL-5D

RRL-5D (P7559005M) Amana Microwave - Overview

Sections of the RRL-5D

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Gasket - sold by the foot – Part Number: 10839706
Gasket - sold by the foot
PartSelect #: PS2000008
Manufacturer #: 10839706
This gasket is gray and is made of a spongy material. This gasket is used for many air conditioners. It will come to you at the length you specify: one foot, two feet, whatever you require. When order...
  No Longer Available
USE ACP 12990525 – Part Number: M0216703
USE ACP 12990525
PartSelect #: PS178013
Manufacturer #: M0216703
  No Longer Available
DISCONTINUED – Part Number: C8893501
DISCONTINUED
PartSelect #: PS2113722
Manufacturer #: C8893501
  No Longer Available
USE ACP A4539601 – Part Number: A4539601
USE ACP A4539601
PartSelect #: PS147632
Manufacturer #: A4539601
  No Longer Available
GROMMET- C – Part Number: 211881
GROMMET- C
PartSelect #: PS1585182
Manufacturer #: 211881
  No Longer Available
.187 DIA POP RIVET STEEL – Part Number: 5067-A
.187 DIA POP RIVET STEEL
PartSelect #: PS2046501
Manufacturer #: 5067-A
  No Longer Available
USE ACP 12990523 – Part Number: M0216517
USE ACP 12990523
PartSelect #: PS177997
Manufacturer #: M0216517
  No Longer Available
SCREW-SMALL, CLIP TRIM (5) – Part Number: M0216515
SCREW-SMALL, CLIP TRIM (5)
PartSelect #: PS177995
Manufacturer #: M0216515
  No Longer Available
BEARING CAP – Part Number: 0088419
BEARING CAP
PartSelect #: PS11912
Manufacturer #: 0088419
  No Longer Available
COUNTERBALANCE ARM – Part Number: C8890602
COUNTERBALANCE ARM
PartSelect #: PS160155
Manufacturer #: C8890602
  No Longer Available
SCREW – Part Number: M0234029
SCREW
PartSelect #: PS178283
Manufacturer #: M0234029
  No Longer Available
DISCONTINUED – Part Number: B8310509
DISCONTINUED
PartSelect #: PS2109255
Manufacturer #: B8310509
  No Longer Available

Questions And Answers for RRL-5D

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door spring wore at contact point with door spring arm
Removed side access panel and replaced spring. The only complication was the Torx screws that secured the side panel. The screw heads had an integral pin in the center of the head that would not allow the Torx tool to be inserted I used my Dremel tool with a cutoff wheel to make a straight slot in the head of each screw and then used a straight screwdriver to remove and re-insert the screws.
Parts Used:
DISCONTINUED
  • William from Clarkston, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!