This sensor (Temperature Sensor, Thermistor, Refrigerator Temperature Sensor) sends the temperature reading of the compartment to the control board. If you notice your refrigerator is too warm, too co...
This NSF-certified water filter helps to improve the taste, quality, and health of your water by removing a number of contaminants including mercury, lead, and trace pharmaceuticals. The filter should...
The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
This OEM part is from GE and is designed for use in your refrigerator. This part is known as a door mounting screw, and is for mounting the handles of the refrigerator to the door studs.
This is the glass drawer cover insert for models of refrigerator. This glass pane is used as a shelf and cover that lays on top of the drawer below it. If this glass is missing or damaged in any way, ...
This is a water filter bypass plug for various refrigerators. This part is used to bypass a missing water filter in your fridge, so you can continue to dispense water and ice from it. If your current ...
$63.71
In Stock
Questions And Answers for PYE22KYNBFS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
May 10, 2023
Hello, the half-shelf that slides back and forth has its plastic edge broken. How can I get a replacement for it? Thank you.
For model number PYE22KYNBFS
Hello Charles, thank you for contacting us. The shelf, part number PS8758543, is the tuck-away shelf assembly of your model. We hope this helps.
This model has the water auto-fill option. Water dispenser works in manual mode but not when AutoFill is selected. The “Sensing” light illuminates for a few seconds and then “Error” is displayed. Where is the sensor and what is the procedure for cleaning it? Also advise if the sensor can be replaced. Thank You!
For model number PYE22KYNBFS
Hello Martin, thank you for your inquiry. The "Error" message is displayed when the auto-fill sensor is not working. Make sure the auto-fill sensor is clean. Clean the sensor with a clean, damp cloth, and do not spray liquids or cleaners directly on the sensor. If this does not fix the issue, replace the auto-fill control board, part number PS12710410. You can replace the auto-fill control board by using the following instructions:
1. Turn off the refrigerator.
2. Insert a flat-headed screwdriver into the bottom hole of the paddle assembly.
3. Disconnect the wire harness from the old control board and replace the board with a new one.
We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
James
August 8, 2023
Hi, I need the small shelf that mounts on the icemaker door inside fridge Thank you.
For model number PYE22KYNBFS
Hello James, thank you for reaching out. The part that you are looking for is the door shelf, part number PS4082627. If you need help placing an order, customer service is open 7 days a week!
why would all the lights inside my refrigerator and the control board on the outside door stop working at the same time?
For model number PYE22KYNBFS
Hello Cheryl, thank you for asking. According to our research, the issue is probably caused due to physical damage to the board or power failure. You may need to replace the control board, part number PS16619572. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
... Read more />After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the c
... Read moreatch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
