PP-1250 Echo Pole Saw - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Upper driveshaft adapter replacement
1. Pull out cone shaped adapter piece (tap out or use pliers). 2. Pull out internal adapter from inside shaft by screwing in an 8MM hex bolt. Once bolt is firmly screwed in, pull or tap out. 3. Install new internal adapter into shaft. Ensure the machined end of the adapter is inserted first. Machined end will have smoother internal grooves when viewing from the end. 4. Install/tap on cone shaped adapter until it bottoms.
Parts Used:
-
David from West Greenwich, RI
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing grommet that holds the fuel tubes
-
Stephen from NAPERVILLE, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Won't Start
I ordered the exact parts for my exact unit from the exploded view diagram provided by Parts Select Website. When the parts arrived the Tune Up kit's fuel filter was the incorrect size. The part listed on their website is incorrect, I only ordered based on the information provided on Parts Select Website. When I requested a refund via Parts Select email address. I never heard another word from them. I had to open dispute from my credit card company.
Parts Used:
-
steven from MARGATE, FL
-
Difficulty Level:Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Couldn't get 'er done with y'all
Had to order from https://www.jackssmallengines.com/ just to get the correct parts we were needing. That's what we get ordering from Canada.
Parts Used:
-
Wayne from EASTLAND, TX
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas cap was leaking
-
Lee from SPRING HILL, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!