All Installation Instructions for Echo Pole Saw PP-1200

Upper driveshaft adapter replacement

1. Pull out cone shaped adapter piece (tap out or use pliers). 2. Pull out internal adapter from inside shaft by screwing in an 8MM hex bolt. Once bolt is firmly screwed in, pull or tap out. 3. Install new internal adapter into shaft. Ensure the machined end of the adapter is inserted first. Machined end will have smoother internal grooves when viewing from the end. 4. Install/tap on cone shaped adapter until it bottoms.

Parts Used:

Upper Drv Shft Adpt-2Pcs

David from West Greenwich, RI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replacing grommet that holds the fuel tubes

Any DIYer can do this. Don’t hesitate.

Parts Used:

Fuel Filter

Spark Plug-Bpm-7Y

Fuel Line Grommet

Stephen from NAPERVILLE, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Couldn't get 'er done with y'all

Had to order from https://www.jackssmallengines.com/ just to get the correct parts we were needing. That's what we get ordering from Canada.

Parts Used:

Clutch Asy

Bearing-Ball 6201

Ring, Retaining

Retaining Ring 32

Wayne from EASTLAND, TX
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set