This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Todd
September 27, 2022
I’m looking to replace the little rubber isolators that the burner grates rest on and can’t find them in the parts list. Are these available?
For model number PGP7036SL1SS
Hello Todd, thank you for your question. The burner grate foot, part number PS11729077, will fit your model. If you have any follow-up queries, please reach out to customer service. We are available seven days a week. Glad to be of help!
Looking to purchase conversion kit from natural gas to propane for model no. Pgp7037sl1ss.Thank you
For model number PGP7036SL1SS
Hello Kurstin, Thank you for your inquiry. We have researched the model you have provided and have found the part you are looking for is PS12342339. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
New burner cap replaced old; just placed over burner; no tools required.
One suggestion: burner cap should have been shipped with thicker bubble protection (easy to do). It was minimally wrapped and placed in a thin, bubble envelope, risking damage in shipping process. Luckily, the burner arrived in tact and usable.
The following are steps in replacing a burner electrode for GE Profile Cook Top Model PGP7030DL1BB 1. Shut off gas and unplug electrical plug 2. Remove all stove grates and turn on knobs 3. Remove all burner covers 4. Remove all screws [three for each burner] 5. Remove two screws near front by removing rubber gra
... Read morete grommets 6. Carefully Lift off stove cover and set aside 7. Remove shield near back of stove top. This exposes all burner wires 8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct. 9. Reassemble in reverse order of steps 1-8