Models
>
PE550
PE550 - Overview
Models starting with PE550
Click on the best match to narrow your results.
- PE550 (Type 5) Weed Eater Edger (Gas Edger)
- PE550 (Type 4) Weed Eater Edger (Gas Edger)
- PE550 (Type 3) Weed Eater Edger (Gas Edger)
- PE550 (Type 2) Weed Eater Edger (Gas Edger)
- PE550 (Type 1) Weed Eater Edger (Gas Edger)
- PE550 Weed Eater Trimmer (Gas Trimmer)
- PE550 ( Type1 530087525 2008-06 ) Husqvarna Trimmer (Handheld Trimmer)
- PE550 ( Type2 530087525 2008-06 ) Husqvarna Trimmer (Handheld Trimmer)
- PE550 ( Type3 530087525 2008-06 ) Husqvarna Trimmer (Handheld Trimmer)
- PE550 ( Type4 530087525 2008-06 ) Husqvarna Trimmer (Handheld Trimmer)
- PE550 ( Type5 530087525 2008-06 ) Husqvarna Trimmer (Handheld Trimmer)
Keep searches simple, eg. "belt" or "pump".
Engine Fuel Filter
PartSelect #: PS9285148
Manufacturer #: 530095646
This fuel filter is for lawn and garden equipment engines.
Fuel filter cleans the fuel before it reaches the carburetor.
Work in a well-ventilated area when installing this part. Drain the fuel...
$4.99
In Stock
Fuel Line (25" Length)
PartSelect #: PS9472350
Manufacturer #: 530069599
This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line we...
$7.46
In Stock
Blade
PartSelect #: PS9971402
Manufacturer #: 530095086
These Weed Eater Blades are 8-3/8 x 1-1/2 inch black, metal blades which come individually sold and attach to the output shaft. Installation requires a wrench set and socket set, and is rated as "Easy...
$6.62
In Stock
Fuel Line Fitting
PartSelect #: PS9469715
Manufacturer #: 530023877
The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "E...
$4.99
In Stock
Spark Plug (Rcj-8Y)
PartSelect #: PS9484192
Manufacturer #: 952030150
This genuine Spark Plug, RCJ8Y, is sold individually, comprised of steel and ceramic, and is white and silver in color. The function of the spark plug is to ignite a mixture of air and fuel in the com...
No Longer Available
Spark Plug (RCJ6Y)
PartSelect #: PS9484195
Manufacturer #: 952030249
The manufacturer-certified white and silver Spark Plug RCJ6Y ignites the air-fuel mixture inside the combustion chamber of your engine. Consult your manual or check your model number to determine if t...
No Longer Available
Fuel Cap (w/ retainer)
PartSelect #: PS9468748
Manufacturer #: 530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic...
$8.71
In Stock
Ring-Piston
PartSelect #: PS9482766
Manufacturer #: 545154009
This OEM Piston Ring is used to provide a seal between the piston and cylinder wall. It attaches around the piston, inside the groove. It will require a screwdriver, allen wrench, torx wrench and sock...
$3.99
In Stock
Carb Gasket/Diaphragm
PartSelect #: PS9472427
Manufacturer #: 530069844
Note: The beige piece pictured has been redesigned. It no longer has the four corner holes. It now only has 2 corner holes at a diagonal.
$18.68
In Stock
Piston Ring
PartSelect #: PS9482765
Manufacturer #: 545154001
This metal ring in your engine, known as the piston ring, seals the gap between the piston and cylinder wall. It makes sure that the gases produced during combustion do not escape and that the engine ...
$4.99
In Stock
Assembly - Flywheel
PartSelect #: PS11811466
Manufacturer #: 545221701
This flywheel is an authentic manufacturer replacement part for use with lawn and outdoor equipment. The flywheel is a heavy, circular disc that has magnets that create an electric charge sent to the ...
$13.69
In Stock
Common Symptoms of models starting with PE550
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken teeth on both large and small gears
Remove the gear assembly by removing the three Torx screws holding it to the main body, remove gas tank from assembly and set aside without removing gas lines. Remove cover, with blade still installed, that gains access to the gears, remove the large gear and wash out the grease with gasoline. Put penetrating oil like PB Blaster or Liquid
... Read more
Wrench on the end of the bolt at the bottom of the bowel-shaped clutch bell and let it work in. Then, take an Allen wrench that fits the bolt in the small gear and clamp it in a vise with the short end pointing straight up. Set the recess of the bolt on the Allen wrench. This will put the bowl-shaped clutch bell that has 4 holes in it up. Take 2 #2 Phillip's screwdrivers and put them in one of the holes directly across from each other so they form an "X" with the right screwdriver closest to you and the left screwdriver behind the right one.. Then, pushing the screwdriver in the right hand and pulling the screwdriver in the left hand will remove the clutch bell in a counter-clockwise motion. Reverse the above when installing a new gear.
Read less
Parts Used:
-
Paul from FLORISSANT, MO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!