Models
>
PB22H54BF
PB22H54BF Husqvarna Lawn Tractor - Overview
Models starting with PB22H54BF
Click on the best match to narrow your results.
- PB22H54BF (2008-07) Husqvarna Lawn Tractor (, 96042006000)
- PB22H54BF (96042006001 2008-07) Husqvarna Lawn Tractor ((2008-07) , 96042006001 (2008-07))
- PB22H54BF (2008-12) Husqvarna Lawn Tractor (, 96042006002)
- PB22H54BF (96042006000 2007-11) Husqvarna Lawn Tractor ((2007-11) , 96042006000 (2007-11))
- PB22H54BFX (2008-06) Husqvarna Lawn Tractor (, 96042007000)
- PB22H54BFX (2007-12) Husqvarna Lawn Tractor (, 96042007000)
Keep searches simple, eg. "belt" or "pump".
Bearing
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$6.21
In Stock
Ring Klip Number T5304-75
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$3.99
In Stock
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
In Stock
Washer 25/32 x 1-1/4 x 16 Ga.
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
In Stock
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
$8.71
In Stock
Ground Drive Fixed Idler Pulley
PartSelect #: PS9016377
Manufacturer #: 532194326
This ground drive fixed idler pulley is for lawn tractors.
910 inch offset
Ground drive fixed idler pulley helps apply tension to the drive belt, allowing the belt to turn.
Wear work gloves to...
$13.69
In Stock
Pulley Idler Flat
PartSelect #: PS9016399
Manufacturer #: 532194327
This flat idler pulley is a genuine OEM replacement part for use in outdoor power equipment. It is made of plastic and features a metal bore adapter, and a radial-style single row bearing. The pulley ...
$13.69
In Stock
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
In Stock
Switch-Ign
PartSelect #: PS9020864
Manufacturer #: 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various fu...
$14.93
On Order
Common Symptoms of models starting with PB22H54BF
[Viewing 2 of 2]Drive system does not work
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it function
... Read more
s properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Read less
Parts Used:
-
Lynn from BOILING SPGS, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
17 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right axle bent
Replacing belt with no problem. I've ordered the front right axle spindle assembly three times. This is from your parts list and you sent me the part and they did not work at all.
Parts Used:
-
MATTHEW from PENNSBURG, PA
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken weld on right axle
Removed wheel (used strong magnet to catch the keeper)
Removed axle assembly from its mounting tube
(used strong magnet again to prevent keeper lose)
Installed replacement axle (again with the magnet)
Lubricated with 90 SAE
Re-installed the wheel (used magnet again to hold the keeper.
Mowed the lawn.
Removed axle assembly from its mounting tube
(used strong magnet again to prevent keeper lose)
Installed replacement axle (again with the magnet)
Lubricated with 90 SAE
Re-installed the wheel (used magnet again to hold the keeper.
Mowed the lawn.
Parts Used:
-
walter from EDINBURG, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!