Models > PB-770H

PB-770H Echo Leaf Blower / Vacuum - Overview

Models starting with PB-770H

Keep searches simple, eg. "belt" or "pump".
Spark Plug Bpm-8Y – Part Number: 15901019830
Spark Plug Bpm-8Y
★★★★★
★★★★★
(1)
PartSelect #: PS9263506
Manufacturer #: 15901019830
This Spark Plug Bpm-8y is a silver and white OEM part. Made of steel and ceramic it is individually sold, and is an electrical part. It is installed with a spark plug socket and is rated as Easy to in...
$3.99
  In Stock
Fuel Tank Vent – Part Number: A356000031
Fuel Tank Vent
★★★★★
★★★★★
(1)
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$7.63
  In Stock
Purge Bulb – Part Number: 12318139130
Purge Bulb
★★★★★
★★★★★
(2)
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$6.81
  In Stock
Washer – Part Number: 69911804560
Washer
PartSelect #: PS9066494
Manufacturer #: 69911804560
This flat washer is a black, metal, individually sold part. If the part becomes damaged due to fatigue it may appear mishapen, and should be replaced. Refer to your owners manual or check your model...
$4.99
  In Stock
Filter, Fuel – Part Number: A369000460
Filter, Fuel
★★★★★
★★★★★
(2)
PartSelect #: PS11826309
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to cle...
$8.60
  In Stock
Clip – Part Number: 13201309820
Clip
PartSelect #: PS9261895
Manufacturer #: 13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers. This part attaches to the fuel filter to secure the fu...
$5.19
  In Stock
Fuel Filter – Part Number: A369000440
Fuel Filter
PartSelect #: PS11836543
Manufacturer #: A369000440
This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fu...
$6.82
  In Stock
Clip – Part Number: V490001230
Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$4.99
  In Stock
Spark Plug Cap Spring – Part Number: 15901103432
Spark Plug Cap Spring
PartSelect #: PS9263507
Manufacturer #: 15901103432
This spark plug wire, also known as a spark plug coil or spark plug cap coil, is compatible with various makes and models of hand-held outdoor power equipment and is sold individually. This wire is in...
$5.19
  In Stock
Clip – Part Number: V491000120
Clip
PartSelect #: PS9246360
Manufacturer #: V491000120
$4.99
  In Stock
Fuel Tank Cap Gasket – Part Number: 13101655830
Fuel Tank Cap Gasket
PartSelect #: PS8863194
Manufacturer #: 13101655830
  No Longer Available
Screw 4X12 – Part Number: V804000050
Screw 4X12
PartSelect #: PS9246398
Manufacturer #: V804000050
$4.99
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
Filter, Fuel
  • Keith from NORWOOD, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
20 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
Purge Bulb
  • Richard from SPRING HILL, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Added extra decals to the tube
Ordered two extra Echo Decals for the front tube. Original was not installed correctly from factory. So I added two extra to make it look better. This was for my ECHO 8010T Leaf Blower. Nice machine..
It looks real nice with four decals on the end..
Parts Used:
Label-Echo
  • Benny from BURTON, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!