Models > PAS-280

PAS-280 (T44713001001-T44713999999) Echo Trimmer - Overview

Sections of the PAS-280

[Viewing 46 of 46]
Keep searches simple, eg. "belt" or "pump".
Spark Plug Bpm-8Y – Part Number: 15901019830
Spark Plug Bpm-8Y
★★★★★
★★★★★
(1)
PartSelect #: PS9263506
Manufacturer #: 15901019830
This Spark Plug Bpm-8y is a silver and white OEM part. Made of steel and ceramic it is individually sold, and is an electrical part. It is installed with a spark plug socket and is rated as Easy to in...
$3.99
  In Stock
Primer Pump – Part Number: 12318140630
Primer Pump
PartSelect #: PS8858167
Manufacturer #: 12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches...
$4.99
  In Stock
Fuel Tank Vent – Part Number: A356000031
Fuel Tank Vent
★★★★★
★★★★★
(1)
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$7.63
  In Stock
Fuel Return Tube 3x6x90mm – Part Number: 13201056330
Fuel Return Tube 3x6x90mm
PartSelect #: PS8862036
Manufacturer #: 13201056330
The fuel return tube or fuel return line, as it is also known, delivers fuel back to the tank from the primer bulb. This is a genuine OEM part from the manufacturer, and it is yellow in color and sold...
$5.19
  In Stock
Clip – Part Number: 13201309820
Clip
PartSelect #: PS9261895
Manufacturer #: 13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers. This part attaches to the fuel filter to secure the fu...
$5.19
  In Stock
Flange Nut 6 – Part Number: 43301903933
Flange Nut 6
PartSelect #: PS9279274
Manufacturer #: 43301903933
$4.99
  In Stock
Fuel Filter – Part Number: A369000440
Fuel Filter
PartSelect #: PS11836543
Manufacturer #: A369000440
This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fu...
$6.82
  In Stock
Nut-Lh Thread – Part Number: 90051100010
Nut-Lh Thread
PartSelect #: PS9308872
Manufacturer #: 90051100010
The m10 Left Hand Thread Nut is a 10mm, gold metal part, sold individually. This nut is a "reverse thread". It requires a wrench or socket set to install, and installation is rated as "Easy". Use this...
$5.19
  In Stock
Split Pin 2x22 – Part Number: 90030020022
Split Pin 2x22
PartSelect #: PS9162863
Manufacturer #: 90030020022
The Cotter Pin (or Split Pin) is a 2x22mm silver metal part, sold individually. It is rated as "Easy" to install, and installation will require a set of pliers. It can be attached in various locations...
$4.99
  In Stock
Spark Arrester Screen – Part Number: 14586240630
Spark Arrester Screen
PartSelect #: PS8867212
Manufacturer #: 14586240630
Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of t...
$5.19
  In Stock
Cutter Blade – Part Number: 69601552632
Cutter Blade
PartSelect #: PS9066006
Manufacturer #: 69601552632
The Cutter Blade (or Cutting blade) is a 7-3/4 inch, silver, metal blade which comes sold in a set of two. They require pliers, and a socket set to install and are rated as "Easy" to install by users....
$9.96
  In Stock
Repair Kit – Part Number: P022001091
Repair Kit
★★★★★
★★★★★
(1)
PartSelect #: PS9321903
Manufacturer #: P022001091
$15.72
  In Stock

Questions And Answers for PAS-280

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replaces the circular saw blade
removed the cotter pin...removed the nut holding the blade on by turning clockwise(reversed threads)....removed old blade ...placed new blade....replaced nut turning counterclockwise and tightened...placed a new cotter pin....job done
Parts Used:
8" 20mm 80 Teeth Circular Saw Brush Blade
  • Donald from DISPUTANTA, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assembly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Parts Used:
Shield Assembly.
  • Robert from COEUR D ALENE, ID
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I lost them they are used to hang the pas echo attachments
The little hook goes into the hole on the pole the cover gets put in from the big hook facing down towards the smaller hook. Put the smaller hook into the hole than push the cover down with some force then you’re ready to hang the attachment on any hook or anything it can hang off of
Parts Used:
Pas Attachment Hanger
  • AmatoMichael from BROOKLYN, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!