Models > NX60A6311SS

NX60A6311SS ((AA-00)) Samsung Range - Overview

Sections of the NX60A6311SS

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Micro Door Switch – Part Number: 3405-001034
Micro Door Switch
★★★★★
★★★★★
(10)
PartSelect #: PS4131192
Manufacturer #: 3405-001034
This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the doo...
$37.08
  In Stock
Range Oven Temperature Sensor – Part Number: DG32-00002B
Range Oven Temperature Sensor
★★★★★
★★★★★
(6)
PartSelect #: PS4240743
Manufacturer #: DG32-00002B
This is a range temperature sensor, used to detect the interior temperature of your oven when it is baking or cooking. If you notice your oven is baking unevenly or at inconsistent temperatures, will ...
$130.08
  In Stock
LEG-LEVELING;FX710BGS/XA – Part Number: DG61-00525A
LEG-LEVELING;FX710BGS/XA
★★★★★
★★★★★
(4)
PartSelect #: PS4240934
Manufacturer #: DG61-00525A
$23.07
  In Stock
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It preven...
$6.59
  In Stock
Right Rear Burner Cap - Black – Part Number: DG62-00111A
Right Rear Burner Cap - Black
★★★★★
★★★★★
(2)
PartSelect #: PS5576950
Manufacturer #: DG62-00111A
This surface burner cap is specially designed to fit with Samsung ranges. It is a genuine OEM replacement part supplied directly by Samsung to ensure compatibility. The burner cap is a round, black ca...
$63.20
  In Stock
Left Rear Burner Cap - Black – Part Number: DG62-00070A
Left Rear Burner Cap - Black
PartSelect #: PS4240973
Manufacturer #: DG62-00070A
$73.16
  In Stock
Range Surface Burner Cap – Part Number: DG62-00067A
Range Surface Burner Cap
PartSelect #: PS4240971
Manufacturer #: DG62-00067A
The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
$86.67
  On Order
BURNER-HEAD(AUX);NX583G0 – Part Number: DG62-00076B
BURNER-HEAD(AUX);NX583G0
★★★★★
★★★★★
(1)
PartSelect #: PS5576948
Manufacturer #: DG62-00076B
$112.56
  In Stock
Wire Rack – Part Number: DG75-01001D
Wire Rack
★★★★★
★★★★★
(3)
PartSelect #: PS12721757
Manufacturer #: DG75-01001D
This stainless steel wire rack is a sturdy platform for baking or roasting food, making sure heat circulates evenly. It measures approximately 7/16 inches by 24 3/4 inches and is usually found inside ...
$265.94
  In Stock
BURNER HEAD RIGHT;NX58F5 – Part Number: DG62-00074C
BURNER HEAD RIGHT;NX58F5
★★★★★
★★★★★
(1)
PartSelect #: PS8764922
Manufacturer #: DG62-00074C
$83.86
  In Stock
BURNER-HEAD;NX583G0VBSR, – Part Number: DG62-00075B
BURNER-HEAD;NX583G0VBSR,
PartSelect #: PS5576947
Manufacturer #: DG62-00075B
$57.74
  In Stock
BURNER CAP DUAL – Part Number: DG62-00122A
BURNER CAP DUAL
PartSelect #: PS8690521
Manufacturer #: DG62-00122A
$166.62
  In Stock

Questions And Answers for NX60A6311SS

Be the first to ask our experts a question about this model!

Common Symptoms of the NX60A6311SS

[Viewing 4 of 4]
Doesn’t shut off
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
No heat
Fixed by
these parts
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The microwave would not turn on or would run with the door open
Other tools that are usefull long needle nose pliers, long thin blade screw driver and small magnetic flashlight. Place the microwave on a work bench and remove the case it cover 3 sides. Place the microwave on a chair so it can stand with the controls up. You are replacing the lower door microswitch. The switch is located behind the control panel in the lower part of the area. The switch is several inches inside this area and your hands will not fit. Take care when moving wires and a couple of sensors. Use the thin blade screwdriver to release a tab holding the switch in place. Do not break this tab. Take the needle nose pliers and remove the switch. Put the wires on the new switch, open the door a short distance so a door lever moves enough to put the microswitch back into the bracket.
Parts Used:
Micro Door Switch
  • Raymond from TROY, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
5 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat consistently
My barely 4 year old Samsung range/oven began not heating consistently. Even though it said 350, for example, we had to increase to 465 to get it to bake. Thought it was the temperature sensor. Ordered and installed new one easily. That didn't solve the problem. So, rather than throw more money at parts that may not have resolved the issue, I got a new Amana range. Samsung appliances go to my 'do not buy' list along with LG!
Parts Used:
Range Oven Temperature Sensor
  • Steven from CHEYENNE, WY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!