This temperature sensor is an OEM replacement part designed for use in ovens/ranges. The sensor detects the temperature inside the oven and relays this information to the control board, which controls...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robin
December 6, 2019
Recurrent panel display issues. Most recent "too many buttons pressed" (a paraphrase). 20 minute reset removes display error and provides use short term before "error" code returns. Not always the same "error".Trying to determine which component has failed. my suspicion is the "brain", having had to replace the "brain" twice in my KitchenAid dishwasher when it was gets "stupid".
For model number MED302ES
Hi Robin, it does sound like the control board failure. Thank you for your question and good luck with your repair!
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstall
... Read moreed the wall oven & tested. The temperature is working normal now. Will return the fixing kit.
