This three cycle quick connect timer is used for some clothes dryers. Because there are many different timers, you should use your model number to make sure this is the right one for your dryer.
I removed the six screws that held the control panel to the washing machine and then tried to unscrew the timer knob counter-clockwise to remove it,but it turned freely and wouldn"t unscrew as it should because it was broken inside. I laid the control panel down and used a hammer and a punch and with a few good taps on the metal shaft tha
... Read moret was on the inside of the timer (hitting back towards the timer knob) it let go and then the knob turned off easily. I then slid the timer knob plate off the shaft. I removed the two 1/4" nut screws from the timer unit with a nut driver. Next I unplugged the electrical plug by lifting the tab on the top and pulled the connection apart. I put the new timer in with the two nut screwsand plugged in the electrical connection. I then slid on the timer knob plate and screwed the knob on. The control panel was put back on with the six screws and the machine worked perfect. Something that you must not forget......unplug all appliances before working on them.
Took the plate off the back of the timer. Unscrewed two screws from the timer, then removed the plastic knob in front of the washer and removed the electrical plug from the timer. Then just reversed the process to install the new timer.