Models > LGTH26V54

LGTH26V54 ((96048004400)(2012-08)) Husqvarna Lawn Mower - Overview

Sections of the LGTH26V54

[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
$8.71
  In Stock
Order within the next 11 hrs and your part ships today!
V-Belt-Drive – Part Number: 532130969
V-Belt-Drive
★★★★★
★★★★★
(1)
PartSelect #: PS9009376
Manufacturer #: 532130969
  No Longer Available
Ground Drive Fixed Idler Pulley – Part Number: 532194326
Ground Drive Fixed Idler Pulley
PartSelect #: PS9016377
Manufacturer #: 532194326
This ground drive fixed idler pulley is for lawn tractors. 910 inch offset Ground drive fixed idler pulley helps apply tension to the drive belt, allowing the belt to turn. Wear work gloves to...
$13.69
  On Order
Pulley Idler Flat – Part Number: 532194327
Pulley Idler Flat
PartSelect #: PS9016399
Manufacturer #: 532194327
This flat idler pulley is a genuine OEM replacement part for use in outdoor power equipment. It is made of plastic and features a metal bore adapter, and a radial-style single row bearing. The pulley ...
$13.69
  In Stock
Order within the next 11 hrs and your part ships today!
Washer Hardened – Part Number: 532188967
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
  In Stock
Order within the next 11 hrs and your part ships today!
Switch-Ign – Part Number: 532193350
Switch-Ign
★★★★★
★★★★★
(2)
PartSelect #: PS9020864
Manufacturer #: 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various fu...
$14.93
  In Stock
Order within the next 11 hrs and your part ships today!
Bearing-Ball-Mandrel – Part Number: 532110485
Bearing-Ball-Mandrel
★★★★★
★★★★★
(1)
PartSelect #: PS9285698
Manufacturer #: 532110485
$11.20
  In Stock
Order within the next 11 hrs and your part ships today!
Washer-Spacer – Part Number: 532187690
Washer-Spacer
PartSelect #: PS9286886
Manufacturer #: 532187690
$3.99
  In Stock
Order within the next 11 hrs and your part ships today!
Washout Port – Part Number: 532415598
Washout Port
★★★★★
★★★★★
(2)
PartSelect #: PS9023060
Manufacturer #: 532415598
$8.71
  In Stock
Order within the next 11 hrs and your part ships today!
Screw – Part Number: 532137729
Screw
PartSelect #: PS9009676
Manufacturer #: 532137729
$4.99
  In Stock
Order within the next 11 hrs and your part ships today!
Bolt-Shoulder – Part Number: 532193406
Bolt-Shoulder
PartSelect #: PS9016060
Manufacturer #: 532193406
  No Longer Available
Pin Cotter 5/16 Bow Tie Lock – Part Number: 532194208
Pin Cotter 5/16 Bow Tie Lock
PartSelect #: PS9016072
Manufacturer #: 532194208
$3.99
  In Stock
Order within the next 11 hrs and your part ships today!

Questions And Answers for LGTH26V54

Be the first to ask our experts a question about this model!

Common Symptoms of the LGTH26V54

[Viewing 2 of 2]
Drive system does not work
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it functions properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Parts Used:
V-Belt-Drive
  • Lynn from BOILING SPGS, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
17 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!