Parts That Fix Frigidaire Refrigerator LFTR2021TFA Door won’t open or close
Door won’t open or close is a commonly reported symptom for the LFTR2021TFA Frigidaire Refrigerator, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your LFTR2021TFA Frigidaire Refrigerator that will fix Door won’t open or close.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Ratings submitted by customers like you who bought this part.
This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh food drawer, check the support rails for any blockage, or visible damage. If the rail is damaged, it should be replaced to ensure no further damage is done to the drawer itself. The repair is straightforward: unscrew and remove the existing support rail, then fasten the new rail in place. This genuine OEM replacement part is made of plastic and is white in color. NOTE: This part is sold separately from the left side drawer support rail. The part measures approximately 16 inches long by 1 inch high.
$50.43
In Stock
PartSelect Number PS430917
Manufacturer Part Number 240530701
Replacing your Frigidaire Refrigerator Drawer Support Rail - Right Side
Customer Repair Stories
Broken meat tray support rail
Pull out the shelf and remove the one screw that holds the support rail in place. Remove broken rail, slip in the new one, then replace the screw. Done!
It takes longer to remove items from shelf and clean it than it does to replace the part.
Henry from Newbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
14 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer rail was snapped so it would not support the drawer
Took whole shelf out. Unscrewed the old rail, screwed in the new rail. Female 55yrs old. I broke it myself and fixed it myself! Very easy!!!!
Ratings submitted by customers like you who bought this part.
$52.86
On Order
PartSelect Number PS1525944
Manufacturer Part Number 240314011
Customer Repair Stories
cracked bottom hinge
My 4 year old grandson used the frig door as a swing.The bottom hinge cracked, then the door wouldn't seal. I propped the door up with some books, removed the broken hinge (2 bolts) and replaced with the new part. Simple fix on the door, only time will fix the 4 year old!
Ratings submitted by customers like you who bought this part.
This door hinge bushing, or hinge bearing, is a genuine OEM replacement part for your refrigerator. The hinge bearing helps the refrigerator door stay on track when opening and closing, ensuring it is flush with the cabinet when closed. You will need a screwdriver and a ratchet in order to complete this repair.
$7.28
In Stock
PartSelect Number PS11770609
Manufacturer Part Number 5304507147
Customer Repair Stories
Refrigerator door was not sealing correctly.
Remove screws from lower hinge and carefully remove the door. In my case it was the lower bearing, flip door upside down being careful to remove anything which might fall off first. I removed the door stop and then pulled the broken bearing out with pliers. Then I pushed the new one in and reassembled it.
Edward from Andover, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door did not come for the opening swing to be reversed
I ordered four bearing hinges and drill holes for the hinges on top and bottom of frezer and fridge doors insert the bearing hinges on the holes and all the other part on the door were able to reversed.
Ratings submitted by customers like you who bought this part.
This drawer rail supports the left hand side of the sliding drawer.
$48.91
In Stock
PartSelect Number PS430916
Manufacturer Part Number 240530601
Replacing your Frigidaire Refrigerator Drawer Support Rail - Left Side
Customer Repair Stories
the drawer support rail broke
it was very simple, my husband did it. had to take the top shelf out and screw in the support rail and that was it. couldn't have been any easier. this was the easiest process from start to finish that we ever had. looked up on line, found your website, ordered the part and it arrived in a couple of days. So easy and your company was
... Read moremost efficient in having the part and in processing. Couldn't have been mored pleased.
Read less
Tara from Winsted, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken meat drawer support
Took out the broken piece, replaced it with the new support using only a screwdriver, and VOILA, it was finished. Thanks!
Ratings submitted by customers like you who bought this part.
This door shelf retaining bar, also known as refrigerator door bar retainer or fridge door rack, is a genuine part sourced from the original manufacturer. It is a white This manufacturer-certified Door Shelf Retainer Bar, sometimes otherwise known as the door rack or bar retainer, is a white, plastic part which can be easily installed onto the inside of the refrigerator or freezer door to hold items on the door shelves. It holds items in your fridge and will show physical damage if broken or warped, at which time it should be replaced. Check your user manual and model number to see if this part is right for you. No tools are required for this installation, the part should simply snap into place. This part measures roughly 25 inches wide, 3 inches high, and 5 inches deep. This part is sold individually, and we recommend checking the other door shelf retaining bars on your refrigerator or freezer at the same time as ordering this part to ensure that no others need to be replaced, as they often wear or warp at similar speeds.
$41.51
In Stock
PartSelect Number PS734935
Manufacturer Part Number 240534901
Replacing your Frigidaire Refrigerator Door Shelf Retainer Bar
Customer Repair Stories
Broken Refrigerator Door Shelf Retainer Bar
We took off the broken bar and put on the new one. It clips on. Took about 10 seconds and could have been done by a 5 year old.
Ward from Stockton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The retainer door shelf broke 3 years ago
I just snapped the new shelves in place and !voila! I should've done this years ago.
Ratings submitted by customers like you who bought this part.
The Door Shelf Retainer Bar, also known as a refrigerator door rack, is a white, plastic part which can be easily installed onto your fridge door. It holds items in your fridge and will show physical damage if broken, at which time it should be replaced. Check your user manual and model number to see if this part is right for you. To install this part, you will need to remove the old one by unlocking the tabs, which can be slid with your fingers. To install the new shelf, line it up with the shelf cut-outs, over the tabs, and gently press it down to lock it into place. This part generally fits the middle door shelf of refrigerators. This is a part that frequently requires multiple parts per refrigerator. Because it is sold individually, you will need to purchase as many door racks as necessary to complete your repair.
$51.19
In Stock
PartSelect Number PS734936
Manufacturer Part Number 240534701
Replacing your Frigidaire Refrigerator Door Shelf Retainer Bar
Customer Repair Stories
rack door broke in half
Rack door slid into place easily. Repair required no tools and took maybe 20 seconds to install! Very easy job!
Lisa from Milwaukee, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
15 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door rack was broken
pulled broke rack off, snapped new one in place. Yeah!! No more broken jars on the floor.
Ratings submitted by customers like you who bought this part.
This is the top hinge.
$36.31
In Stock
PartSelect Number PS3490416
Manufacturer Part Number 240313703
Customer Repair Stories
Original plastic hinge cracked across the middle
Removed 2 hex screws & old hinge, placed new hinge on cabinet & found that it didn't fit; one hole was about 1/8" off. Had to drill a new hole in cabinet top in order to attach new hinge. Hinge works fine now. I'm glad to find the hinge is metal; original one was plastic.
Al from Sarver, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The original part was plastic/and broke
unscrewed to little bolts and installed the new/metal part we got rfom partselect.If we may say.this is a great company to buy from! Fast!
