This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, ...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
$99.29
In Stock
Questions And Answers for LDP6797BD
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
June 14, 2023
I need to order the control panel and door handle as it has two thin cracks in it. What is the part number
For model number LDP6797BD
Hi Karen, thank you for getting in touch. According to our research on your model, the control panel assembly, part number PS16662007, houses the controls and also acts as a handle for opening and closing the door. If you require assistance to place an order, please contact customer service!
Hello Carla, thank you for contacting us. According to our research, we would recommend checking the control panel, part number PS16662007, to fix the issue. We hope this helps!
Why am I constantly getting a moldy smell from the dishwasher when I open it? I cleaned out the drain at the bottom but there is always standing water which I think is giving off the order. Do not know why it is not completely draining. I did not install this. It was professionally installed so I am assuming they did the right thing.
For model number LDP6797BD
Hello Mike, thank you for your query. We have found that even if your drain hose is not kinked or otherwise obstructed with food waste, it could still be the reason why your dishwasher smells. If your drain hose drops from the back of your unit and runs along the floor before moving upward towards the sink, gravity could be working against you. If you have a drooping drain hose, try to find a way to reposition it. Ideally, your drain hose will run downwards from the dishwasher into the sink disposal, allowing gravity to do most of the work. If the dirty water and food waste do not have to go upwards to the disposal, they are less likely to get stuck and create a bad smell in the hose. You may need to check the drain filter for clogging and reposition the drain hose, part number PS16621806, to fix the issue. We hope this helps, good luck with this repair!
