Models > KVWC906JSS0

KVWC906JSS0 Whirlpool Range Hood - Overview

Models starting with KVWC906JSS0

Keep searches simple, eg. "belt" or "pump".
Range Hood Control Panel – Part Number: W11387938
Range Hood Control Panel
★★★★★
★★★★★
(2)
PartSelect #: PS12728687
Manufacturer #: W11387938
The Control panel houses the selection buttons for the range hood.
$132.27
  In Stock
SWTCH-SLDE – Part Number: W11569415
SWTCH-SLDE
PartSelect #: PS16660546
Manufacturer #: W11569415
$30.52
  In Stock
SWTCH-SLDE – Part Number: W11662407
SWTCH-SLDE
PartSelect #: PS16875964
Manufacturer #: W11662407
$38.48
  In Stock
DAMPR-HOOD – Part Number: W11156393
DAMPR-HOOD
PartSelect #: PS12347711
Manufacturer #: W11156393
$149.04
  In Stock
SWTCH-RCKR – Part Number: W10853393
SWTCH-RCKR
PartSelect #: PS11731241
Manufacturer #: W10853393
$93.19
  On Order
SWTCH-RCKR – Part Number: W11193832
SWTCH-RCKR
PartSelect #: PS12348906
Manufacturer #: W11193832
$97.22
  In Stock
SWTCH-SLDE – Part Number: W11397924
SWTCH-SLDE
PartSelect #: PS12731208
Manufacturer #: W11397924
$58.06
  In Stock
FILTER – Part Number: W10351892
FILTER
PartSelect #: PS3489939
Manufacturer #: W10351892
$198.67
  In Stock
BEZEL – Part Number: W10351924
BEZEL
PartSelect #: PS3489941
Manufacturer #: W10351924
$109.79
  Special Order
CHNL-GRSE – Part Number: W10294022
CHNL-GRSE
PartSelect #: PS2377954
Manufacturer #: W10294022
$295.69
  Special Order
Socket – Part Number: WPW10370558
Socket
PartSelect #: PS11753878
Manufacturer #: WPW10370558
$50.13
  In Stock
BACKSPLASH – Part Number: W10285448
BACKSPLASH
PartSelect #: PS2377751
Manufacturer #: W10285448
$704.02
  Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
one switch went out on the range hood controlling the lights.
The repair did not happen. Parts select sent me the wrong part. They sent a cover plate without any switches.
I;m still waiting for the correct part.!!!!!!!!!!!!!!!!!!!!!!
Parts Used:
Range Hood Control Panel
  • Jeffrey from MILTON, FL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
SWITCH CONTROL UNIT HAD BROKEN OFF FROM ONE END OF ITS INTERIOR MOUNTING
Removed and cleaned to overhead grease trap filters which required a sink full of detergent some wire wool pads and and much elbow grease. This is probably a service task that should be performed at least annually for hoods in frequent use. And be careful not to cut your fingers on some of the sharp interior edges.

With the grease filters removed it was then possible to access the switch unit from the inside of the hood. Used a small Phillips screwdriver to loosen and remove the two fastening screws and removed and replaces the whole unit.

Refitting was the reverse of the above process.
Parts Used:
Range Hood Control Panel
  • NICHOLAS & LEIGH from CHARLOTTE, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control panel broken
Amazing. PartSelect shipped me the wrong part and then wouldn't refund shipping cost to return it. They need to change their shipping policy as it now states they refund shipping if they were the cause of the mistake.
Parts Used:
Range Hood Control Panel
  • Brian from LEANDER, TX
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!