KGCT305TWH0 KitchenAid Cooktop - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sparker would not quit sparking after lighting the gas.
Turned off the gas then disconnected the gas line. Unplugged the AC cord and removed the unit from the counter top. Had to locate a suitable area to lay the cooktop, rather large. The bottom cover is held on by 6-8 sheet metal screws, however, the gas regulator and nipple must be removed also for the cover to come off. I removed the Igniter module screws, leaving the wires connected and mounted the new module in it's place. I then removed one wire at a time from the old and put it on the new part. Replaced the back cover and reinstalled the gas regulator with fresh pipe sealant. Probably took an hour including cleaning the top and counter top.
Parts Used:
-
John from Waterford, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench (Adjustable)
35 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken burner control knobs
the knobs where hard to find around my area. i went to several appliance repair stores and they were unable to locate the knobs. so, i went online, your site made finding them easy because i was able to restrict my search to exactly what i needed. they shipped quickly, we are very pleased.
Parts Used:
-
Linda from Morris, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control Knob stem broke
-
Marla from Roseland, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
10 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grate pads fell off- burner scratched surface-need special glue
Bought in auto repair store special black glue used for sealing gaskets. Husband needed to use latex gloves, toothpicks, ice pick, and small screw driver to glue and install new burner pads.
Parts Used:
-
Sandra from Lake Wylie, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knobs were cracked
-
Curt from Teaneck, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spark module failure, wouldn't spark.
The repair was fairly straightforward, much easier the second time around. The first part was defective. (irregular spark). I reordered and installed the new one. It works, but nowhere near as good as the original.The problem is that the frequency of the spark on these replacement modules is only once per second. To get technical, the gas as presented to the spark is turbulent, causing several sparks to occur before the ideal mixture coincides with the spark. Needless to say, there is an excess of gas wafting around the kitchen until it lights, sometimes in excess of 20 seconds. NOT SAFE! Our BBQ and fireplace insert spark orders of magnitude faster than this.
Parts Used:
-
Bob from LAKEWOOD, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Previous Burner Control Knobs were broken
Centered over the existing post and pushed down...very simple
Parts Used:
-
Stacy from ROCKFORD, AL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
all but one of the four knobs were broken.
My folks were swtitching one knob around to controll all the burners. The repairman said the cooktop had been long retired and the only option was buying a new one. It's a great cooktop, though and it was a shame to ditch it for just because of knobs. Alas, right before we about to buy a new one, I discovered you guys. Halleluiah.
Parts Used:
-
Frank from Mamaroneck, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic knob had broken
-
Ernie from Gualala, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Knobs were broken
Replaced them easily by putting these new knobs on. Easy peasy lemon sqeazy.
Parts Used:
-
KEITH from DOWNERS GROVE, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic on burner knob broken
-
ana from penfield, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knobs broke
-
ALLEN from Santa Fe, NM
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ignitor would not work do to broken knob.
Replaced broken knobs with new ones and the problem was solved.
Parts Used:
-
Joseph from Andover, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
just replaced old knobs
-
isabel from HIGHLAND HEIGHTS, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Knobs were cracked
They are slip-fit onto burner controls. Pulled them up, aligned new "D" shape in know with control, gently pushed them straight down. Careful, they apparently crack easily.
Parts Used:
-
Torkil from Newbury Park, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!