JVB98SH1SS General Electric Range Hood - Overview
Sections of the JVB98SH1SS
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".

Membrane Switch
PartSelect #: PS953533
Manufacturer #: WB24X10115
This part is the replacement membrane switch for your range hood. It is approximately 4 inches in length, and the part of the switch that you push is black in color. The membrane switch or downdraft v...
No Longer Available

REMOTE TRIM KIT Stainless Steel
PartSelect #: PS2353419
Manufacturer #: WB07X11200
No Longer Available
Questions And Answers for JVB98SH1SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jason
January 12, 2020
Down draft no longer will come up when i push button. Before this i was having to push button harder then normal to get it to respond. Any part suggestions? Thank you
For model number JVB98SH1SS
Hello Jason and thank you for writing.
It certainly sounds like it could be a faulty membrane switch PS953533, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Jeff
January 21, 2020
The hood won’t raise, and the motor is making a grinding noise. The switch doesn’t appear to have any effect. Replace the motor or both?Thanks
For model number JVB98SH1SS
Hello Jeff, Thank you for the question. With the noise, we would suggest replacing the Motor. We hope this helps.
Was this helpful?
Thank you for voting!
Rae
January 22, 2020
Motor runs continuously when plugged in. Switch has no effect and it does not raise.
For model number JVB98SH1SS
Hello and thank you for writing.
This could possibly indicate a malfunctioning membrane switch PS953533, you should check for signs of damage, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Related Parts:
Dwayne
February 9, 2020
Something got wedged when fan was going up. It went back down and now just runs and will not go up or down. Is there a switch or something that is out of adjustment?
For model number JVB98SH1SS
Hello and thank you for writing.
It certainly sounds like it could be a faulty membrane switch PS953533 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Related Parts:
Oliver
October 20, 2022
The downdraft vent no longer rises up and down. Can this be repaired or replaced?
For model number JVB98SH1SS
Hi Oliver, thank you for the question. According to our research on the model, the problem appears to be with the Membrane Switch, part number PS953533. If that does not help then the issue is likely to be with the Control Board, part number PS953858. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the JVB98SH1SS
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Downdraft wouldn't work at all..... broken sensor
I pulled up the wires that the membrane switch hooks to and connected the new one with the new sensor pushed them down the opening. Took the sticky paper off the up and down button and stuck it too the indentation where it goes and there you have it as good as new! Works great!
Parts Used:
-
Richard from Chardon, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
putting membrane switch in
Received membrane switch quick after I ordered it. Connected switch to downdrafts system in less than 15 minutes. Tested system to make sure it worked. very happy with partsselect shipped quickly after ordering.
Parts Used:
-
jeffrey from hickory, NC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!