This is foam tape and it is usually used in conjunction with your range, specifically on the cooktop. Its purpose is to help seal the edges of the cook top to the counter top. Another of its functions...
This infinite control switch is used to control the overall heat output of the burners on your stovetop. If you have noticed issues with your stovetop burners not getting hot enough or not turning on ...
This part is the replacement spring for the radiant element in your range. It is black in color, curved in shape, and is approximately 1 inch by 1/2 an inch. The radiant element spring is found beneat...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elvezia
July 15, 2021
My warm indicator surface light on the front right element stays on for hours after I have shut the element off. Is this dangerous ?
For model number JP3036DL2BB
Hello Elvezia, Thank you for the question. This is not a dangerous issue right now but it indicates a defective Switch that controls the element that was in use when the issue started. The switch could continue to have other issues such as not turning the element off or only operating on High heat and that can become dangerous. We suggest replacing the switch. We hope this helps!
1.- going online to orden part 2 disconnect the power from the aplaince shoot Dow the power 3 tear down the appliance and disconnect the four terminals from the damage part reconnect the terminals to th new part reensamble the appliance and ready to go save $275 bucks in handy man labor
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.