Models > JE1390GAC

JE1390GAC - Overview

Models starting with JE1390GAC

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Primary Door Interlock Switch – Part Number: WB24X10047
Primary Door Interlock Switch
★★★★★
★★★★★
(18)
PartSelect #: PS237015
Manufacturer #: WB24X10047
This interlock switch is located in the door latch.
$33.50
  In Stock
Order within the next 3 hrs and your part ships today!
Micro Switch – Part Number: 3B73362F
Micro Switch
★★★★★
★★★★★
(12)
PartSelect #: PS3522738
Manufacturer #: 3B73362F
This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximatel...
$11.30
  In Stock
Order within the next 3 hrs and your part ships today!
Switch,Micro – Part Number: 6600W1K001C
Switch,Micro
★★★★★
★★★★★
(4)
PartSelect #: PS3529293
Manufacturer #: 6600W1K001C
This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or cl...
$10.66
  On Order
SWITCH MONITOR INTERLOCK – Part Number: WB24X25397
SWITCH MONITOR INTERLOCK
★★★★★
★★★★★
(4)
PartSelect #: PS11766871
Manufacturer #: WB24X25397
This is the replacement monitor switch for your microwave. It is black in color and measures approximately 1 inch by ¾ of an inch. This switch monitors the door latch position of your microwave and co...
$24.84
  In Stock
Order within the next 3 hrs and your part ships today!
Fuse,Time Delay – Part Number: 3B74133Q
Fuse,Time Delay
★★★★★
★★★★★
(3)
PartSelect #: PS3522743
Manufacturer #: 3B74133Q
The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a power surge, in ord...
$7.74
  In Stock
Order within the next 3 hrs and your part ships today!
Screw,Tapping – Part Number: 1TTL0402818
Screw,Tapping
★★★★★
★★★★★
(1)
PartSelect #: PS3517555
Manufacturer #: 1TTL0402818
$8.19
  In Stock
Order within the next 3 hrs and your part ships today!
Kit Assembly – Part Number: 3861W2A006A
Kit Assembly
PartSelect #: PS3522504
Manufacturer #: 3861W2A006A
$30.80
  On Order
Spring – Part Number: 4B72023A
Spring
PartSelect #: PS3525457
Manufacturer #: 4B72023A
$7.37
  On Order
Upper Door Latch – Part Number: WB02X10548
Upper Door Latch
PartSelect #: PS223829
Manufacturer #: WB02X10548
  No Longer Available
Common Nut – Part Number: 1NHB0500032
Common Nut
PartSelect #: PS3517437
Manufacturer #: 1NHB0500032
$8.19
  In Stock
Order within the next 3 hrs and your part ships today!
Lower Door Latch – Part Number: WB02X10549
Lower Door Latch
PartSelect #: PS223830
Manufacturer #: WB02X10549
  No Longer Available
Thermostat – Part Number: 6930W1A003K
Thermostat
PartSelect #: PS3530464
Manufacturer #: 6930W1A003K
$8.19
  In Stock
Order within the next 3 hrs and your part ships today!
View More
Back to Top

Common Symptoms of models starting with JE1390GAC

[Viewing 4 of 4]
Won’t turn on
Fixed by
these parts
Fixing Fixing Fixing
Show All
No heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing Fixing Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing Fixing Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave runs with the door open
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover
and test to see if that solved the problem. If so then well done!!
Parts Used:
Primary Door Interlock Switch
  • Thomas from Andover, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
35 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reconnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
Read less
Parts Used:
Primary Door Interlock Switch
  • Michael from Ridgefield, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
37 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door micro switch. (unit does not start heating)
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far left side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Read less
Parts Used:
Micro Switch
  • JAMES from BILLINGS, MT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
30 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top