Models > HDA797K-01

HDA797K-01 Hotpoint Dishwasher - Overview

Sections of the HDA797K-01

[Viewing 1 of 1]
Diagram and Parts List for Hotpoint Dishwasher
Keep searches simple, eg. "belt" or "pump".
Water Inlet Valve – Part Number: WD15X93
Water Inlet Valve
★★★★★
★★★★★
(8)
PartSelect #: PS259411
Manufacturer #: WD15X93
This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or ...
$57.61
  In Stock
Lower Rack Roller with Clip – Part Number: WD12X5026
Lower Rack Roller with Clip
PartSelect #: PS259266
Manufacturer #: WD12X5026
Sold individually. Order quantity required.
$37.45
  Special Order
LATCH Assembly – Part Number: WD13X5014
LATCH Assembly
PartSelect #: PS259304
Manufacturer #: WD13X5014
$196.21
  Special Order
Lower Dishrack - Rack Only – Part Number: WD28X304
Lower Dishrack - Rack Only
PartSelect #: PS261374
Manufacturer #: WD28X304
Wheels must be ordered separately.
$241.81
  Special Order
DISCONTINUED – Part Number: WD28X303
DISCONTINUED
PartSelect #: PS261373
Manufacturer #: WD28X303
  No Longer Available
SWITCH RKR – Part Number: WD21X647
SWITCH RKR
PartSelect #: PS260323
Manufacturer #: WD21X647
$30.21
  Special Order
TIMER – Part Number: WD21X646
TIMER
PartSelect #: PS260322
Manufacturer #: WD21X646
  No Longer Available
DISCONTINUED – Part Number: WD22X132
DISCONTINUED
PartSelect #: PS260581
Manufacturer #: WD22X132
$39.52
  Special Order
DISCONTINUED – Part Number: WD5X63
DISCONTINUED
PartSelect #: PS263871
Manufacturer #: WD5X63
$59.02
  Special Order
CAM DET – Part Number: WD12X407
CAM DET
PartSelect #: PS259215
Manufacturer #: WD12X407
$20.14
  Special Order
SCREW – Part Number: WD2X5186
SCREW
PartSelect #: PS261545
Manufacturer #: WD2X5186
$3.74
  Special Order
HINGE Assembly LEFT – Part Number: WD14X5076
HINGE Assembly LEFT
PartSelect #: PS259351
Manufacturer #: WD14X5076
$92.91
  Special Order
View More
Back to Top

Questions And Answers for HDA797K-01

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the HDA797K-01

[Viewing 4 of 4]
Will not fill with water
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing
Show All
Not draining
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)
1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to gain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.

Install new valve by reversing the procedure.
Read less
Parts Used:
Water Inlet Valve
  • Don from Mount Vernon, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
71 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Little/no water coming in & dirty dishes
1. Remove access panel under door. 2.Shut off hot water.3. Shut off electric to washer.4. Disconnect water line from water inlet valve.5. Remove small outlet water line from valve. Replace valve & reconnect. OR !!! 1.Take solenoid valve & bracket off of original inlet valve 2. Pull out white plastic diaphragm cover. 3. Remove diaphragm & clean out water holes with a pin. 4. Reassemble valve. 5. Reinstall original water inlet valve & save $27.00
Read less
Parts Used:
Water Inlet Valve
  • William from Polson, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set, Wrench (Adjustable)
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thanks for sending the correct part. You guys did a great job.
Just put the part on.
Parts Used:
Water Inlet Valve
  • Albert from Dallas, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set, Wrench set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top