HCM036EA Haier Freezer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer temp was either -20 or +30, operation was intermittant
I replaced the thermostat, all but the capillary pipe. It was stuck in the
tube in which it fits. I had to let it sit unplugged until the ice in the cap tube melted, and I was able to lightly jerk on the cap pipe until it came
loose and slipped out. Put in the new one and sealed the end of the
tube with putty.
tube in which it fits. I had to let it sit unplugged until the ice in the cap tube melted, and I was able to lightly jerk on the cap pipe until it came
loose and slipped out. Put in the new one and sealed the end of the
tube with putty.
Parts Used:
-
Thomas A from BLUEMONT, VA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad switch.
Removed the old switch and put in a new one. Sure beats buying a new deep freeze.
Parts Used:
-
Tim from VINCENNES, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!