Quick Question!

Have you ever purchased from PartSelect.com before?

Models > HA207S

HA207S Maytag Washer - Overview

Get Parts and Repair Help for HA207S

If you know the washer repair part you need, you can browse the list of all parts on the HA207S, or you can search by name or part description. You can also find your part by where it is located on the HA207S by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the HA207S

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$48.77

Drive Belt - 120v 50 cycle

$37.16

Pump Belt

This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

Motor Start Switch

WATER VALV

$19.44

CLIP- CAPA

PULLEY

CAPACITOR

MOTOR 120-50

MOTOR EXTERNAL START SWITCH

$26.90

CAPACITOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Agitator was moving very slowly.

  • Customer: Gary from ENUMCLAW, WA
  • Difficulty: Very Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Unhooked water and drain lines, Unplugged electrical. Removed the two phillips screws at the bottom of the front cover. Removed the Front cover. TIpped machine backwards at about a 45 degree angle using a 2x4 to support the machine. Removed the pump belt and the drive belt. Installed the old pump belt and the new drive belt. Loosened the 3 each 5/16" b... read more