Models > GM-J267NSTM > Instructions

GM-J267NSTM LG Refrigerator - Instructions

All Instructions for the GM-J267NSTM
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Refrigerator Ice maker quit producing ice.
This repair was easy. The ice maker assembly is basically a plug and play unit that requires first removing the ice bucket as described inside the freezer door. Next, remove several screws the support the unit, then gently lifting the ice maker assembly out, just far enough to access the 2 electrical plugs that operate the unit. Carefully unplug the old unit and remove it. Next, plug the new unit and then reverse the disassembly process. I could have done this in 10 minutes had I not been careful not to break anything. No special tools are required.
Parts Used:
ICE MAKER ASSEMBLY,KIT
  • Thomas from HUNTSVILLE, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I' need to send you the part back to you
but I' need you to send me where I can send the part to I' have not got a e-mail where to send the part to. here is my order number 20824314 on the part that goten .
Parts Used:
ICE MAKER ASSEMBLY,KIT
  • Henry from Manhattan, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change filter light came on
Took out the old and replaced the new filter
Parts Used:
Refrigerator Water Filter
  • Ralph from VALLEY SPGS, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GM-J267NSTM
1 - 3 of 3