GL27M6WXFB Gibson Washer Dryer Combo Parts & Repair Help | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
Models > GL27M6WXFB

GL27M6WXFB Gibson Washer Dryer Combo - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(16)
PartSelect #:PS418807
Manufacturer #:131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear b...
$4.05
In Stock
(21)
PartSelect #:PS1146950
Manufacturer #:134511600
This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer,...
$16.38
In Stock
(5)
PartSelect #:PS418888
Manufacturer #:131858004
Sold individually. This white knob accepts a D-shaped shaft.
$32.71
In Stock
(12)
PartSelect #:PS418433
Manufacturer #:131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, w...
$36.05
In Stock
(22)
PartSelect #:PS470049
Manufacturer #:5303931775
This kit contains two coils, one is a two-wire secondary coil and the other is a three-wire booster coil. Both coils in the ignition coil kit should be used together in the clothes...
$18.66
In Stock
(2)
PartSelect #:PS12579101
Manufacturer #:131724301
This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing
$6.80
In Stock
(10)
PartSelect #:PS815509
Manufacturer #:134190200
The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the...
$26.01
In Stock
PartSelect #:PS459766
Manufacturer #:5303281019
This grounding ball is used in dryers and works to prevent friction in the rear bearing when the drum rotates. If your dryer is making a squealing, loud, banging noise or will not ...
$10.52
In Stock
(3)
PartSelect #:PS455020
Manufacturer #:5303207102
The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. Thi...
$10.98
In Stock
(5)
PartSelect #:PS418897
Manufacturer #:131862900
The idler pulley on your washing machine allows the drive belt to operate smoothly. If your washer is not spinning or agitating, makes too much noise, or you notice a burning smell...
$14.80
In Stock
Questions and Answers for GL27M6WXFB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replace broken drive belt

Drive V-Belt – Part Number: 134511600
  • Customer: rodney from fairfield bay, AR
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 253 of 279 people found this instruction helpful
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub pulley by hand to run... read more

Dryer would heat initially then cool down

  • Customer: Brett from Monticello, MN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 89 of 99 people found this instruction helpful
The top of the dryer was easily removed by prying the front up with a screwdriver then tipping it back and off of the mounting brackets. Then the front of the dryer was removed by unscrewing a single screw on each side that held the front to the side panels then pulling the front away from the dryer. Once the front was off, the coils were easily accessible... read more

Washer Continued To Fill To Point Of Overflow

Water Inlet Valve – Part Number: 134190200
  • Customer: alvaro from east hampton, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 79 of 87 people found this instruction helpful
First I removed the top panel held by four screws at rear of panel, pulling the panel foward and up. Then disconnected the power and water connections. Then I removed the two screws holding the flow valve to the washer rear panel,pulled the valve foward ,removed the two electric connectors, pinched the water clamp with pliers and removed the water connec... read more