This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it...
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed...
This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely throu...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This long harness thermistor kit is what helps monitor and regulate the temperature inside your refrigerator. It can be located in either the freezer compartment near the evaporator coils or in the fr...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake re...
$165.75
On Order
Questions And Answers for GI5FSAXVY02
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dean
January 20, 2020
Electric went out and tried to come back on numerous times then noticed the temp control panel was blank any button you push temp displays 888s only when pushed tried unplugging for a while and plug back in.Did not help same problem.Any suggestions would be great.
For model number GI5FSAXVY02
Hello and thank you for writing.
We suggest to try a hard reset:
Go to your breaker box and shut the breakers for your unit off, wait 5 minutes and then turn the breaker to on again. That should hopefully clear this problem.
If this does not fix this problem then your main control board PS11752535 might have shorted and possibly needs to be replaced. We hope this helps. Please contact us anytime.
Front display turns on and off about 5 times with no error codes and a component sounds of trying to turn on before back to normal. Clicking appears to be in the back of fridge. Unsure what component this is?
For model number GI5FSAXVY02
Hello Mark,
Thank you for your question We have done an investigation into your model GI5FSAXVY02, we have discovered that the Capacitor would be the most accurate cause of your symptoms. It is available under part number PS11757023. The capacitor supplies voltage to the compressor which allows your refrigerator to run properly. If it is malfunctioning, it would explain the current symptoms you are having. We hope this helps you.
Hello Ryan, Thank you for the question. We suggest changing the water filter fist if it has not been changed in at least 6 months. Also check the water lines as they can become frozen over and now allow water through. You can also test the Dual Water Valve. There are two different solenoids on your valve. One to send water up to the ice maker and one to send water to your water dispenser. We hope this helps.
How to reinstall the left side basket in bottom refrigerator after taking out to clean?
For model number GI5FSAXVY02
Hello Mary, Thankyou for the question. The Bottom Crisper Drawer will just line up with the rails of the Shelf Frame and slide into place. We hope this helps!
Water dispenser won’t shut off. Water continues to run. I assume it’s the little switch that’s activated when the flap is pushed in. Couldn’t find it in the replacement parts. Or it could be the control valve, lower back of the refrigerator?
For model number GI5FSAXVY02
Hello Jim, Thank you for the question. The Switch is only sold as part of the Chute Assembly, so the Chute may need to be replaced. We suggest testing the Valve first. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le
... Read moret's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate
... Read moremotions and a steady thought process on the problem helped disengage the darned old filter!
