FUF17SVBRWW General Electric Freezer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The freezer door was catching when opened and frost was building inside telling me that the seal wasn't good.
I called the local GE dealer for repair. The repair person arrived and told me that he could not get the part. The freezer was too old. Then he charged me $60 for coming out. I went online and did a search for parts with the model number above. I found Partselect.com and the diagrams showed which part I needed. It was in stock and I ordered it. My husband and I removed the door to the freezer, pushed the part into the hole at the bottom of the door and put the door back on its hinges. It works perfectly. Thank you.
Parts Used:
-
Paulette from Great Falls, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not respond when button was pushed
-
Norman from COVENTRY, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ez control failed after lightening storm
-
James from NORMAN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer has power but not cold
This happened before, when we loose electricity it blows the computer module.
Pull the bad one out. When the new one arrives, unwrap and plug in! That easy! Viola, freezer will now work. Set the temp control as needed.
Pull the bad one out. When the new one arrives, unwrap and plug in! That easy! Viola, freezer will now work. Set the temp control as needed.
Parts Used:
-
CINDY from KALAMAZOO, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket not sealing
Per the UTube video ...
Once the gasket was on, the door would not seal.
Gasket was removed and placed in dryer again to "soften" but to no avail on the second try.
When we received the package, the box was ripped open and only the wadded up gasket in the box. Don't know if someone just shoved it in or what. I think this is what caused the issue with it not sealing. Also no instructions except on your website. We ended up putting on the original gasket and sealed the cut on the gasket with tape. Freezer seals well and no leaks or issues. I still have the gas but no clue what to do with it if we can't get it to work. Is there a refund available?
Once the gasket was on, the door would not seal.
Gasket was removed and placed in dryer again to "soften" but to no avail on the second try.
When we received the package, the box was ripped open and only the wadded up gasket in the box. Don't know if someone just shoved it in or what. I think this is what caused the issue with it not sealing. Also no instructions except on your website. We ended up putting on the original gasket and sealed the cut on the gasket with tape. Freezer seals well and no leaks or issues. I still have the gas but no clue what to do with it if we can't get it to work. Is there a refund available?
Parts Used:
-
Hazel from FRIENDSWOOD, TX
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Temp control and interior light stops working every 4 to 5 days
pulled out the old control on the front door and inserted the new control. The only crucial part is to line up the pins on the bottom edge of the control to make sure none are bent during installation. The problem I was having would only appear every four or five days, so far the freezer has been plugged in with new control for three days but so far so good.
Parts Used:
-
Stan from Brush Praire, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The freezer was missing the key
I ordered a pair of new keys from Parts Select and found the website extremely easy to use. I found the key I needed in less than 10 minutes and ordered the item. The key woked perfectly. Delivery was prompt and the cost was resonable. I have bookmarked the site for future use. thank you. James
Parts Used:
-
james from las cruces, NM
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!